于 2018年10月30日 GMT+08:00 下午2:27:43, Jagan Teki <ja...@amarulasolutions.com> 写到: >On Sat, Oct 27, 2018 at 10:41 AM Icenowy Zheng <icen...@aosc.io> wrote: >> >> From: Jun Nie <jun....@linaro.org> >> >> Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, >16-bit >> 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and >one >> powering-only) and a miniHDMI port. >> >> Signed-off-by: Icenowy Zheng <icen...@aosc.io> >> Signed-off-by: Jun Nie <jun....@linaro.org> >> --- >> Changes in v4: >> - Fixed MMC card detect on product batch boards. >> - Synced the device tree from the same commit with other H3/H2+ DTs. >> >> arch/arm/dts/Makefile | 1 + >> .../dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 >++++++++++++++++++ >> board/sunxi/MAINTAINERS | 5 + >> configs/bananapi_m2_zero_defconfig | 13 ++ >> 4 files changed, 140 insertions(+) >> create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts >> create mode 100644 configs/bananapi_m2_zero_defconfig >> >> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile >> index 0de6234eec..c2de60e031 100644 >> --- a/arch/arm/dts/Makefile >> +++ b/arch/arm/dts/Makefile >> @@ -365,6 +365,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ >> sun8i-a83t-cubietruck-plus.dtb \ >> sun8i-a83t-tbs-a711.dts >> dtb-$(CONFIG_MACH_SUN8I_H3) += \ >> + sun8i-h2-plus-bananapi-m2-zero.dtb \ >> sun8i-h2-plus-libretech-all-h3-cc.dtb \ >> sun8i-h2-plus-orangepi-r1.dtb \ >> sun8i-h2-plus-orangepi-zero.dtb \ > >[snip] > >> >> +SINOVOIP BPI M2 ZERO BOARD > >Can be "BANANAPI M2 ZERO" > >> +M: Icenowy Zheng <icen...@aosc.io> >> +S: Maintained >> +F: configs/Sinovoip_BPI_M2_Zero_defconfig > >configs/bananapi_m2_zero_defconfig > >> + >> SINOVOIP BPI M3 A83T BOARD >> M: VishnuPatekar <vishnupatekar0...@gmail.com> >> S: Maintained >> diff --git a/configs/bananapi_m2_zero_defconfig >b/configs/bananapi_m2_zero_defconfig >> new file mode 100644 >> index 0000000000..91302eb49c >> --- /dev/null >> +++ b/configs/bananapi_m2_zero_defconfig >> @@ -0,0 +1,13 @@ >> +CONFIG_ARM=y >> +CONFIG_ARCH_SUNXI=y >> +CONFIG_SPL=y >> +CONFIG_MACH_SUN8I_H3=y >> +CONFIG_DRAM_CLK=408 >> +CONFIG_DRAM_ZQ=3881979 >> +CONFIG_DRAM_ODT_EN=y >> +CONFIG_MMC0_CD_PIN="" > >I don't think this would need, it's PF6 by default for H3
This board has inverted CD pin, which is not supported by U-Boot. So CD is disabled. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
