On Sat, Oct 27, 2018 at 10:41 AM Icenowy Zheng <icen...@aosc.io> wrote: > > From: Jun Nie <jun....@linaro.org> > > Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit > 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one > powering-only) and a miniHDMI port. > > Signed-off-by: Icenowy Zheng <icen...@aosc.io> > Signed-off-by: Jun Nie <jun....@linaro.org> > --- > Changes in v4: > - Fixed MMC card detect on product batch boards. > - Synced the device tree from the same commit with other H3/H2+ DTs. > > arch/arm/dts/Makefile | 1 + > .../dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 ++++++++++++++++++ > board/sunxi/MAINTAINERS | 5 + > configs/bananapi_m2_zero_defconfig | 13 ++ > 4 files changed, 140 insertions(+) > create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts > create mode 100644 configs/bananapi_m2_zero_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 0de6234eec..c2de60e031 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -365,6 +365,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ > sun8i-a83t-cubietruck-plus.dtb \ > sun8i-a83t-tbs-a711.dts > dtb-$(CONFIG_MACH_SUN8I_H3) += \ > + sun8i-h2-plus-bananapi-m2-zero.dtb \ > sun8i-h2-plus-libretech-all-h3-cc.dtb \ > sun8i-h2-plus-orangepi-r1.dtb \ > sun8i-h2-plus-orangepi-zero.dtb \
[snip] > > +SINOVOIP BPI M2 ZERO BOARD Can be "BANANAPI M2 ZERO" > +M: Icenowy Zheng <icen...@aosc.io> > +S: Maintained > +F: configs/Sinovoip_BPI_M2_Zero_defconfig configs/bananapi_m2_zero_defconfig > + > SINOVOIP BPI M3 A83T BOARD > M: VishnuPatekar <vishnupatekar0...@gmail.com> > S: Maintained > diff --git a/configs/bananapi_m2_zero_defconfig > b/configs/bananapi_m2_zero_defconfig > new file mode 100644 > index 0000000000..91302eb49c > --- /dev/null > +++ b/configs/bananapi_m2_zero_defconfig > @@ -0,0 +1,13 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_SPL=y > +CONFIG_MACH_SUN8I_H3=y > +CONFIG_DRAM_CLK=408 > +CONFIG_DRAM_ZQ=3881979 > +CONFIG_DRAM_ODT_EN=y > +CONFIG_MMC0_CD_PIN="" I don't think this would need, it's PF6 by default for H3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
