Andy, Kerver, Lin,
could you give a try to this series on evb-rk3328 please ? This has been
blocked for a long time already.
Thanks,
JJ
On 22/10/2018 18:24, Jean-Jacques Hiblot wrote:
On 22/10/2018 18:16, Lukasz Majewski wrote:
Hi Jean-Jacques,
Hi Lukasz,
gentle ping on the status on this series.
Do we have tested by from somebody from RockChip community?
I haven't seen anything on the ML. I pinged Kever Yang earlier today
about it.
JJ
JJ
On 09/10/2018 16:29, Loic Devulder wrote:
On 9/25/18 11:03 AM, Jean-Jacques Hiblot wrote:
This series aims at bringing improvements to the dwc3_generic
driver so that it can be used by most of the platforms using the
dwc3 controller.
I tested this on with DRA7 and AM57x platforms for both Peripheral
and Host operations. The code to enable DM USB host & dev support
for those platforms will be submitted in a separate series.
Michal Simek has tested this series:
" I have tested it on zcu100 with usb stick, usb to ethernet
converter and also dfu.
Tested-by: Michal Simek <michal.si...@xilinx.com>"
Tested-by: Loic Devulder <ldevul...@suse.de>
I tested this series of patches on Khadas VIM as well as
Libretech-cc board and it resolved this issue ("USB0:
"Synchronous Abort" handler, esr 0x96000210") I had on both cards
(I think on all s905x Amlogic SBC)!
Enhancements:
- use separate Kconfig option for DM USB Periphal and DM USB Host.
This allow platforms to keep their non-DM USB peripheral code and
use the DM USB host.
- fixes the bind/probe confusion in dwc3_generic. The probe is
done when the USB device is first needed.
- handles PHYs when in the peripheral mode. The code to handle the
PHYs is shared with the host side
- handles clock and reset
- bind host controller to the more generic driver 'xhci-dwc3'
Changes in v3:
- fixes bug dwc3_setup_phy(): the phy arrays wasn't returned. This
was visible only when the device is removed.
- Stub the DWC3 PHY operations if CONFIG_IS_ENABLED(PHY) is false.
This fixes all build issues but one (evb-rk3328).
- Fix build issue with evb-rk3328 by enabling CONFIG_USB_DWC3.
This has little impact on the footprint and should not break the
runtime as the xhci-rockchip driver has its own probe function.
Nevertheless this was !!! NOT TESTED !!! by lack of hw
Changes in v2:
- Updated commit log
- Fixed typo in thordown.c
- select DM_USB_DEV by default for zynqmp platforms
Jean-Jacques Hiblot (8):
usb: gadget: Do not call board_usb_xxx() directly in USB gadget
drivers
usb: introduce a separate config option for DM USB device
usb: udc: implement DM versions of
usb_gadget_initialize()/_release()/_handle_interrupt()
dwc3_generic: do not probe the USB device driver when it's bound
dwc3: move phy operation to core.c
configs: evb-rk3328: Enable CONFIG_USB_DWC3
dwc3-generic: Handle the PHYs, the clocks and the reset lines
dwc3-generic: Add select_dr_mode operation
arch/arm/Kconfig | 2 +
cmd/fastboot.c | 4 +-
cmd/rockusb.c | 4 +-
cmd/thordown.c | 4 +-
cmd/usb_gadget_sdp.c | 4 +-
cmd/usb_mass_storage.c | 4 +-
common/dfu.c | 6 +-
configs/evb-rk3328_defconfig | 1 +
drivers/usb/Kconfig | 6 ++
drivers/usb/dwc3/Kconfig | 7 +-
drivers/usb/dwc3/core.c | 89 +++++++++++++++-
drivers/usb/dwc3/dwc3-generic.c | 207
+++++++++++++++++++++++++++++---------
drivers/usb/dwc3/ep0.c | 1 -
drivers/usb/gadget/ether.c | 38 +------
drivers/usb/gadget/udc/udc-core.c | 44 +++++++-
drivers/usb/host/xhci-dwc3.c | 95 ++---------------
include/dwc3-uboot.h | 19 ++++
include/linux/usb/gadget.h | 18 ++++ 18 files changed, 367
insertions(+), 186 deletions(-)
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
