> -----Original Message----- > From: Fabio Estevam [mailto:feste...@gmail.com] > Sent: 2018年10月26日 8:23 > To: sba...@denx.de > Cc: u-boot@lists.denx.de; thar...@gateworks.com; Peng Fan > <peng....@nxp.com>; Fabio Estevam <feste...@gmail.com> > Subject: [PATCH] mx8mq_evk: README: Delete file introduced by mistake > > board/freescale/mx8mq_evk/README has been introduced by mistake in > commit d0dd73974c61 ("imx: add i.MX8QXP MEK board support") > > Remove it for now as this should be introduced when mx8mq_evk support is in > place. > > Reported-by: Tim Harvey <thar...@gateworks.com> > Signed-off-by: Fabio Estevam <feste...@gmail.com>
Thanks, Reviewed-by: Peng Fan <peng....@nxp.com> > --- > board/freescale/mx8mq_evk/README | 81 > ---------------------------------------- > 1 file changed, 81 deletions(-) > delete mode 100644 board/freescale/mx8mq_evk/README > > diff --git a/board/freescale/mx8mq_evk/README > b/board/freescale/mx8mq_evk/README > deleted file mode 100644 > index cd7e67e..0000000 > --- a/board/freescale/mx8mq_evk/README > +++ /dev/null > @@ -1,81 +0,0 @@ > -U-Boot for the NXP i.MX8MQ EVK board > - > -Quick Start > -=========== > - > -- Build U-Boot > -- Build the ARM Trusted firmware binary > -- Get DDR firmware and mkimage tool > -- Generate flash.bin using imx-mkimage > -- Flash the binary into the SD card > -- Boot > - > -Build U-Boot > -============ > - > -$ make mx8mq_evk_defconfig > -$ make > - > -Get and Build the ARM Trusted firmware > -====================================== > - > -$ git clone > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource. > codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&data=02%7C01%7Cpeng.f > an%40nxp.com%7C7b3f29a20357475a4b2108d63ad9451a%7C686ea1d3bc2b4 > c6fa92cd99c5c301635%7C0%7C0%7C636761102173985023&sdata=6xDil > qlAeAHIjR%2FDbHTzdpPLBW5fhcwWjeUGOlkjjOs%3D&reserved=0 > -$ cd imx-atf/ > -$ git checkout origin/imx_4.9.51_imx8m_beta -$ make PLAT=imx8mq bl31 > - > -Get the DDR firmware and mkimage tool > -============================== > - > -$ wget > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.n > xp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-7.2.bin& > data=02%7C01%7Cpeng.fan%40nxp.com%7C7b3f29a20357475a4b2108d63ad9 > 451a%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6367611021739 > 85023&sdata=%2BuPPIGvFH7VoCGZL4Hw6%2B0KxuxLsH5udefKwWE%2F > vJZc%3D&reserved=0 > -$ chmod +x firmware-imx-7.2.bin > -$ ./firmware-imx-7.2.bin > - > -Download the imx-mkimage tool: > - > -$ git clone > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource. > codeaurora.org%2Fexternal%2Fimx%2Fimx-mkimage%2F&data=02%7C01 > %7Cpeng.fan%40nxp.com%7C7b3f29a20357475a4b2108d63ad9451a%7C686ea > 1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636761102173995031&sd > ata=7%2Fgnl%2B6gT5uHlzz5Xt8nCprpna%2FVjnPhw62x4yEICKE%3D&rese > rved=0 > -$ cd imx-mkimage/ > -$ git checkout origin/imx_4.9.51_imx8m_beta > - > - > -Generate flash.bin using imx-mkimage > -==================================== > - > -Copy the following binaries to imx-mkimage/iMX8M folder: > - > -$ cp imx-atf/build/imx8mq/release/bl31.bin imx-mkimage/iMX8M/ -$ cp > u-boot/u-boot-nodtb.bin imx-mkimage/iMX8M/ -$ cp u-boot/spl/u-boot-spl.bin > imx-mkimage/iMX8M/ -$ cp u-boot/arch/arm/dts/fsl-imx8mq-evk.dtb > imx-mkimage/iMX8M/ > - > -Copy the following firmwares to imx-mkimage/iMX8 folder : > - > -$ cp > firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem.bin > imx-mkimage/iMX8M/ -$ cp > firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem.bin > imx-mkimage/iMX8M/ -$ cp > firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem.bin > imx-mkimage/iMX8M/ -$ cp > firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem.bin > imx-mkimage/iMX8M/ > - > -If you want to run with HDMI, copy signed_hdmi_imx8m.bin to > imx-mkimage/iMX8M. > - > -Before generating the flash.bin, transfer the mkimage generated by U-Boot to > iMX8M folder: > - > -$ cp u-boot/tools/mkimage imx-mkimage/iMX8M/ -$ mv > imx-mkimage/iMX8M/mkimage imx-mkimage/iMX8M/mkimage_uboot > - > -$ cd imx-mkimage/ > -$ make SOC=iMX8M flash_spl_uboot > - > -Or for using HDMI: > - > -$ make SOC=iMX8M flash_hdmi_spl_uboot > - > -Flash the binary into the SD card > -================================= > - > -Burn the flash.bin binary to SD card offset 33KB: > - > -$ sudo dd if=iMX8M/flash.bin of=/dev/sd[x] bs=1024 seek=33 > - > -Boot > -==== > -Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD. > -- > 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
