From: Hiroyuki Yokoyama <hiroyuki.yokoyama...@renesas.com>
GSX clock force supply code is unnecessary at U-Boot,
because GSX clock control is supported at the kernel driver.
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama...@renesas.com>
---
board/renesas/salvator-x/salvator-x.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/board/renesas/salvator-x/salvator-x.c
b/board/renesas/salvator-x/salvator-x.c
index 296aa90a12..726a236af3 100644
--- a/board/renesas/salvator-x/salvator-x.c
+++ b/board/renesas/salvator-x/salvator-x.c
@@ -31,7 +31,6 @@ void s_init(void)
{
}
-#define GSX_MSTP112 BIT(12) /* 3DG */
#define SCIF2_MSTP310 BIT(10) /* SCIF2 */
#define DVFS_MSTP926 BIT(26)
#define HSUSB_MSTP704 BIT(4) /* HSUSB */
@@ -60,20 +59,9 @@ int board_early_init_f(void)
int board_init(void)
{
- u32 cpu_type = rmobile_get_cpu_type();
-
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
- if (cpu_type == RMOBILE_CPU_TYPE_R8A7795) {
- /* GSX: force power and clock supply */
- writel(0x0000001F, SYSC_PWRONCR2);
- while (readl(SYSC_PWRSR2) != 0x000003E0)
- mdelay(20);
-
- mstp_clrbits_le32(MSTPSR1, SMSTPCR1, GSX_MSTP112);
- }
-
/* USB1 pull-up */
setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
--
2.18.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
