Updates the device tree file from the the Linux tree as of v4.19-rc4,
exactly Linux commit:
commit 7876320f8880 (tag: v4.19-rc4)
Author: Linus Torvalds <torva...@linux-foundation.org>
Date: Sun Sep 16 11:52:37 2018 -0700
Linux 4.19-rc4
Signed-off-by: Vasily Khoruzhick <anars...@gmail.com>
Acked-by: Maxime Ripard <maxime.rip...@bootlin.com>
Tested-by: Maxime Ripard <maxime.rip...@bootlin.com>
Cc: Vagrant Cascadian <vagr...@debian.org>
---
arch/arm/dts/sun50i-a64.dtsi | 122 +++++++++++++++++++++++++++++------
1 file changed, 103 insertions(+), 19 deletions(-)
diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
index 7a083637c4..d3daf90a87 100644
--- a/arch/arm/dts/sun50i-a64.dtsi
+++ b/arch/arm/dts/sun50i-a64.dtsi
@@ -43,9 +43,12 @@
*/
#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/sun50i-a64-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
/ {
interrupt-parent = <&gic>;
@@ -57,17 +60,21 @@
#size-cells = <1>;
ranges;
-/*
- * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
- * However there is no support for this clock on A64 yet, so we depend
- * on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
- */
simplefb_lcd: framebuffer-lcd {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "mixer0-lcd0";
clocks = <&ccu CLK_TCON0>,
- <&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
+ <&display_clocks CLK_MIXER0>;
+ status = "disabled";
+ };
+
+ simplefb_hdmi: framebuffer-hdmi {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "mixer1-lcd1-hdmi";
+ clocks = <&display_clocks CLK_MIXER1>,
+ <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
status = "disabled";
};
};
@@ -168,10 +175,46 @@
#size-cells = <1>;
ranges;
+ de2@1000000 {
+ compatible = "allwinner,sun50i-a64-de2";
+ reg = <0x1000000 0x400000>;
+ allwinner,sram = <&de2_sram 1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000000 0x400000>;
+
+ display_clocks: clock@0 {
+ compatible = "allwinner,sun50i-a64-de2-clk";
+ reg = <0x0 0x100000>;
+ clocks = <&ccu CLK_DE>,
+ <&ccu CLK_BUS_DE>;
+ clock-names = "mod",
+ "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
+
syscon: syscon@1c00000 {
- compatible = "allwinner,sun50i-a64-system-controller",
- "syscon";
+ compatible = "allwinner,sun50i-a64-system-control";
reg = <0x01c00000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_c: sram@18000 {
+ compatible = "mmio-sram";
+ reg = <0x00018000 0x28000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00018000 0x28000>;
+
+ de2_sram: sram-section@0 {
+ compatible =
"allwinner,sun50i-a64-sram-c";
+ reg = <0x0000 0x28000>;
+ };
+ };
};
dma: dma-controller@1c02000 {
@@ -364,6 +407,11 @@
bias-pull-up;
};
+ pwm_pin: pwm_pin {
+ pins = "PD22";
+ function = "pwm";
+ };
+
rmii_pins: rmii_pins {
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
"PD18", "PD19", "PD20", "PD22", "PD23";
@@ -474,15 +522,6 @@
status = "disabled";
};
- pwm: pwm@1c21400 {
- compatible = "allwinner,sun50i-a64-pwm",
- "allwinner,sun5i-a13-pwm";
- reg = <0x01c21400 0x8>;
- clocks = <&osc24M>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@@ -617,8 +656,6 @@
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
mdio: mdio {
compatible = "snps,dwmac-mdio";
@@ -638,11 +675,25 @@
#interrupt-cells = <3>;
};
+ pwm: pwm@1c21400 {
+ compatible = "allwinner,sun50i-a64-pwm",
+ "allwinner,sun5i-a13-pwm";
+ reg = <0x01c21400 0x400>;
+ clocks = <&osc24M>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
+ clocks = <&osc32k>;
+ #clock-cells = <1>;
};
r_intc: interrupt-controller@1f00c00 {
@@ -664,6 +715,29 @@
#reset-cells = <1>;
};
+ r_i2c: i2c@1f02400 {
+ compatible = "allwinner,sun50i-a64-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x01f02400 0x400>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_APB0_I2C>;
+ resets = <&r_ccu RST_APB0_I2C>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ r_pwm: pwm@1f03800 {
+ compatible = "allwinner,sun50i-a64-pwm",
+ "allwinner,sun5i-a13-pwm";
+ reg = <0x01f03800 0x400>;
+ clocks = <&osc24M>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_pwm_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
@@ -675,6 +749,16 @@
interrupt-controller;
#interrupt-cells = <3>;
+ r_i2c_pins_a: i2c-a {
+ pins = "PL8", "PL9";
+ function = "s_i2c";
+ };
+
+ r_pwm_pin: pwm {
+ pins = "PL10";
+ function = "s_pwm";
+ };
+
r_rsb_pins: rsb {
pins = "PL0", "PL1";
function = "s_rsb";
--
2.19.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
