Dear Joonyoung Shim,
In message <4bb016dc.5000...@samsung.com> you wrote:
> This patch adds support s5p6442 SoC. The s5p6442 SoC is ARM1176
> processor.
>
> Cc: Minkyu Kang <mk7.k...@samsung.com>
> Cc: Kyungmin Park <kyungmin.p...@samsung.com>
> Signed-off-by: Joonyoung Shim <jy0922.s...@samsung.com>
...
> +#define S5P6442_PWR_CFG 0xE010C000
...
> +#define S5P6442_EINT_WAKEUP_MASK 0xE010C004
> +#define S5P6442_WAKEUP_MASK 0xE010C008
> +#define S5P6442_PWR_MODE 0xE010C00C
> +#define S5P6442_PWR_MODE_SLEEP (1 << 2)
> +#define S5P6442_NORMAL_CFG 0xE010C010
> +#define S5P6442_IDLE_CFG 0xE010C020
> +#define S5P6442_STOP_CFG 0xE010C030
> +#define S5P6442_STOP_MEM_CFG 0xE010C034
> +#define S5P6442_SLEEP_CFG 0xE010C040
> +#define S5P6442_OSC_FREQ 0xE010C100
> +#define S5P6442_OSC_STABLE 0xE010C104
> +#define S5P6442_PWR_STABLE 0xE010C108
> +#define S5P6442_MTC_STABLE 0xE010C110
> +#define S5P6442_CLAMP_STABLE 0xE010C114
> +#define S5P6442_WAKEUP_STAT 0xE010C200
> +#define S5P6442_OTHERS 0xE010E000
> +#define S5P6442_OTHERS_SYSCON_INT_DISABLE (1 << 0)
> +#define S5P6442_MIE_CONTROL 0xE010E800
> +#define S5P6442_HDMI_CONTROL 0xE010E804
> +#define S5P6442_USB_PHY_CON 0xE010E80C
> +#define S5P6442_DAC_CONTROL 0xE010E810
> +#define S5P6442_MIPI_DPHY_CONTROL 0xE010E814
> +#define S5P6442_ADC_CONTROL 0xE010E818
> +#define S5P6442_PS_HOLD_CONTROL 0xE010E81C
> +#define S5P6442_PS_HOLD_DIR_OUTPUT (1 << 9)
> +#define S5P6442_PS_HOLD_DIR_INPUT (0 << 9)
> +#define S5P6442_PS_HOLD_DATA_HIGH (1 << 8)
> +#define S5P6442_PS_HOLD_DATA_LOW (0 << 8)
> +#define S5P6442_PS_HOLD_OUT_EN (1 << 0)
> +#define S5P6442_INFORM0 0xE010F000
> +#define S5P6442_INFORM1 0xE010F004
> +#define S5P6442_INFORM2 0xE010F008
> +#define S5P6442_INFORM3 0xE010F00C
> +#define S5P6442_INFORM4 0xE010F010
> +#define S5P6442_INFORM5 0xE010F014
> +#define S5P6442_INFORM6 0xE010F018
> +#define S5P6442_INFORM7 0xE010F01C
Please use C structs to describe these registers.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Hiring experienced unix people is like a built-in filter against
idiots. Hiring experienced NT people provides no such guarantee.
-- Miguel Cruz in wgl96.349$cc.122...@typhoon2.ba-dsg.net
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
