This patch adds the possibility to handle seperate PHYs to MCF5445x.
Naming is chosen to resemble the contrary CONFIG_FEC_SHARED_PHY in the
linux kernel.
Signed-off-by: Wolfgang Wegner <w.weg...@astro-kom.de>
---
cpu/mcf5445x/cpu_init.c | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c
index 8d51d35..db03296 100644
--- a/cpu/mcf5445x/cpu_init.c
+++ b/cpu/mcf5445x/cpu_init.c
@@ -185,8 +185,19 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
struct fec_info_s *info = (struct fec_info_s *)dev->priv;
if (setclear) {
+#ifdef CONFIG_SYS_FEC_NO_SHARED_PHY
+ if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
+ gpio->par_feci2c |=
+ (GPIO_PAR_FECI2C_MDC0_MDC0 |
+ GPIO_PAR_FECI2C_MDIO0_MDIO0);
+ else
+ gpio->par_feci2c |=
+ (GPIO_PAR_FECI2C_MDC1_MDC1 |
+ GPIO_PAR_FECI2C_MDIO1_MDIO1);
+#else
gpio->par_feci2c |=
(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
+#endif
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
--
1.5.6.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
