ls1088ardb-pb and ls1088ardb both boards are ls1088a based soc,
board type detection is dynamic at boot time

Signed-off-by: Pramod Kumar <pramod.kuma...@nxp.com>
---
 board/freescale/ls1088a/ls1088a.c | 27 +++++++++++++++++++++++++--
 include/configs/ls1088a_common.h  |  3 ++-
 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/board/freescale/ls1088a/ls1088a.c 
b/board/freescale/ls1088a/ls1088a.c
index 517a8ceed9..1e2ad98c6e 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2017 NXP
+ * Copyright 2017-2018 NXP
  */
 #include <common.h>
 #include <i2c.h>
@@ -67,6 +67,24 @@ int init_func_vid(void)
 }
 #endif
 
+int is_pb_board(void)
+{
+       u8 board_id;
+
+       board_id = QIXIS_READ(id);
+       if (board_id == LS1088ARDB_PB_BOARD)
+               return 1;
+       else
+               return 0;
+}
+
+int fixup_ls1088ardb_pb_banner(void *fdt)
+{
+       fdt_setprop_string(fdt, 0, "model", "LS1088ARDB-PB Board");
+
+       return 0;
+}
+
 #if !defined(CONFIG_SPL_BUILD)
 int checkboard(void)
 {
@@ -79,7 +97,10 @@ int checkboard(void)
 #ifdef CONFIG_TARGET_LS1088AQDS
        printf("Board: LS1088A-QDS, ");
 #else
-       printf("Board: LS1088A-RDB, ");
+       if (is_pb_board())
+               printf("Board: LS1088ARDB-PB, ");
+       else
+               printf("Board: LS1088A-RDB, ");
 #endif
 
        sw = QIXIS_READ(arch);
@@ -585,6 +606,8 @@ int ft_board_setup(void *blob, bd_t *bd)
        if (err)
                return err;
 #endif
+       if (is_pb_board())
+               fixup_ls1088ardb_pb_banner(blob);
 
        return 0;
 }
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 822fd76cc5..743d0cf30f 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017 NXP
+ * Copyright 2017-2018 NXP
  */
 
 #ifndef __LS1088_COMMON_H
@@ -27,6 +27,7 @@
 #include <asm/arch/config.h>
 #include <asm/arch/soc.h>
 
+#define LS1088ARDB_PB_BOARD            0x4A
 /* Link Definitions */
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_FSL_OCRAM_BASE + 
0xfff0)
 
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to