On Mon, Oct 8, 2018 at 4:36 AM Jean-Jacques Hiblot <jjhib...@ti.com> wrote: > > > > On 06/10/2018 03:22, Adam Ford wrote: > > On Thu, Oct 4, 2018 at 8:48 AM Jean-Jacques Hiblot <jjhib...@ti.com> wrote: > >> This series remove the usage of the DM_I2C_COMPAT option for all the ti > >> platforms. It also takes this opportunity to not disable DM_I2C in the SPL. > >> > >> There are a couples of issues to fix: > >> - CMD_EEPROM does not support the DM API. Fixed by removing this option > >> when DM_I2C is used without DM_I2C_COMPAT > >> - i2c_get_chip_for_busnum() does not work when OF_CONTROL is not used > >> (as is the case with am33xx SPL). > >> - The I2C driver do not support DM_I2C without OF_CONTROL. > >> - Most of the PMIC drivers do not support the I2C DM API. > >> - Board detection is done prior DM initialization. Fixed by moving it after > >> DM is initialized. That move breaks the DRA7 platforms (The fixes for > >> that are at the last 5 patches this series) > >> > >> When all this is taken care of DM_I2C_COMPAT can be removed and DM_I2C > >> enabled in the SPL. > >> > >> This has been tested with the following boards: > >> - am437x SK > >> - am335x SK > >> - am335x beaglebone (both DM and non-DM config) > >> - dra76 evm > >> - am572 evm > >> - k2g evm > >> > >> > >> > > The whole series applied and > > > > Tested-by: Adam Ford <aford...@gmail.com> #omap3_logic > Thanks for testing > but I guess you meant that for v2 not v1 ?
Sorry. I did intend that for the V2 patch. Thanks for doing that. I had started on it for the twl4030, but your implemention was a little cleaner than what I was doing. adam > JJ > > > > adam > >> Andreas Dannenberg (1): > >> ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT > >> > >> Jean-Jacques Hiblot (17): > >> cmd: Kconfig: Do not include EEPROM if DM_I2C is used without > >> DM_I2C_COMPAT > >> dm: i2c: Add dm_i2c_probe_device() to test the presence of a chip > >> dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL > >> configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS > >> i2c: omap24xx_i2c: Use platdata to probe the device > >> am335x: Register the I2C controllers if DM_I2C is used. > >> dts: am43x: omap5: Add node for I2C in SPL > >> omap: detect the board after DM is available > >> power: make most tps drivers and the twl4030 driver compatible with > >> DM_I2C > >> configs: am335x_pdu001: Explicitly enable CONFIG_I2C_COMPAT > >> ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL > >> am57xx: remove non-DM I2C code > >> configs: dra7xx-evm: increase the size of the malloc's pool before > >> relocation > >> lib: fdtdec: Add function re-setup the fdt more effeciently > >> drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig > >> drivers: core: nullify gd->dm_root after dm_uninit() > >> dra7: Allow selecting a new dtb after board detection. > >> > >> Vignesh R (1): > >> i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset > >> > >> arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 4 + > >> arch/arm/dts/omap5-u-boot.dtsi | 4 + > >> arch/arm/include/asm/arch-am33xx/i2c.h | 47 +-- > >> arch/arm/include/asm/arch-omap3/i2c.h | 47 --- > >> arch/arm/include/asm/arch-omap4/i2c.h | 45 --- > >> arch/arm/include/asm/arch-omap5/i2c.h | 45 --- > >> arch/arm/include/asm/omap_i2c.h | 24 ++ > >> arch/arm/mach-keystone/ddr3_spd.c | 7 + > >> arch/arm/mach-omap2/am33xx/board.c | 24 +- > >> arch/arm/mach-omap2/am33xx/clk_synthesizer.c | 56 +++- > >> arch/arm/mach-omap2/clocks-common.c | 2 + > >> arch/arm/mach-omap2/hwinit-common.c | 23 +- > >> board/ti/am335x/board.c | 17 +- > >> board/ti/am335x/mux.c | 14 + > >> board/ti/am43xx/board.c | 35 +- > >> board/ti/am57xx/board.c | 25 +- > >> board/ti/common/board_detect.c | 110 +++---- > >> board/ti/ks2_evm/board_k2g.c | 11 + > >> cmd/Kconfig | 1 + > >> configs/am335x_pdu001_defconfig | 2 + > >> configs/am57xx_evm_defconfig | 1 + > >> configs/am57xx_hs_evm_defconfig | 1 + > >> configs/dra7xx_evm_defconfig | 4 +- > >> configs/dra7xx_hs_evm_defconfig | 1 + > >> configs/omap3_logic_defconfig | 1 + > >> drivers/core/Kconfig | 12 +- > >> drivers/core/device.c | 10 +- > >> drivers/core/root.c | 1 + > >> drivers/core/uclass.c | 24 ++ > >> drivers/i2c/i2c-uclass.c | 8 + > >> drivers/i2c/omap24xx_i2c.c | 467 > >> ++++++++++++++++++--------- > >> drivers/power/palmas.c | 39 +++ > >> drivers/power/pmic/pmic_tps62362.c | 27 ++ > >> drivers/power/pmic/pmic_tps65217.c | 47 ++- > >> drivers/power/pmic/pmic_tps65218.c | 88 +++++ > >> drivers/power/pmic/pmic_tps65910.c | 60 +++- > >> drivers/power/twl4030.c | 39 +++ > >> include/asm-generic/global_data.h | 4 + > >> include/configs/am43xx_evm.h | 2 + > >> include/configs/ti_armv7_common.h | 18 +- > >> include/dm/uclass-internal.h | 13 + > >> include/fdtdec.h | 17 + > >> include/i2c.h | 13 + > >> include/palmas.h | 5 + > >> include/power/tps65217.h | 2 + > >> include/power/tps65910.h | 1 + > >> include/twl4030.h | 6 +- > >> lib/fdtdec.c | 38 ++- > >> 48 files changed, 1033 insertions(+), 459 deletions(-) > >> create mode 100644 arch/arm/include/asm/omap_i2c.h > >> > >> -- > >> 2.7.4 > >> > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
