In order to use DM_I2C, we need to move the board detection after the
early SPL initialization.
Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com>
---
arch/arm/mach-omap2/am33xx/board.c | 9 ++++++---
arch/arm/mach-omap2/hwinit-common.c | 5 ++---
2 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/am33xx/board.c
b/arch/arm/mach-omap2/am33xx/board.c
index c121f27..2fc364d 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -472,12 +472,15 @@ void early_system_init(void)
#ifdef CONFIG_DEBUG_UART_OMAP
debug_uart_init();
#endif
-#ifdef CONFIG_TI_I2C_BOARD_DETECT
- do_board_detect();
-#endif
+
#ifdef CONFIG_SPL_BUILD
spl_early_init();
#endif
+
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+ do_board_detect();
+#endif
+
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
/* Enable RTC32K clock */
rtc32k_enable();
diff --git a/arch/arm/mach-omap2/hwinit-common.c
b/arch/arm/mach-omap2/hwinit-common.c
index 1a24acb..d0781d7 100644
--- a/arch/arm/mach-omap2/hwinit-common.c
+++ b/arch/arm/mach-omap2/hwinit-common.c
@@ -193,11 +193,10 @@ void early_system_init(void)
* to prevent overwrites.
*/
save_omap_boot_params();
-#endif
- do_board_detect();
-#ifdef CONFIG_SPL_BUILD
spl_early_init();
#endif
+ do_board_detect();
+
vcores_init();
#ifdef CONFIG_DEBUG_UART_OMAP
debug_uart_init();
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
