Hi York, > -----Original Message----- > From: York Sun > Sent: Saturday, September 22, 2018 02:50 > To: Ran Wang <ran.wan...@nxp.com>; Alison Wang > <alison.w...@nxp.com>; Sumit Garg <sumit.g...@nxp.com> > Cc: Qiang Zhao <qiang.z...@nxp.com>; u-boot@lists.denx.de > Subject: Re: [PATCH 1/3] qe: kconfig: U QE kconfig > > On 08/09/2018 02:56 AM, Ran Wang wrote: > > add Kconfig option for U QUICC Engine. > > > > Signed-off-by: Ran Wang <ran.wan...@nxp.com> > > --- > > drivers/Kconfig | 2 ++ > > drivers/qe/Kconfig | 8 ++++++++ > > 2 files changed, 10 insertions(+) > > create mode 100644 drivers/qe/Kconfig > > > > diff --git a/drivers/Kconfig b/drivers/Kconfig index c2e813f..da2f811 > > 100644 > > --- a/drivers/Kconfig > > +++ b/drivers/Kconfig > > @@ -68,6 +68,8 @@ source "drivers/power/Kconfig" > > > > source "drivers/pwm/Kconfig" > > > > +source "drivers/qe/Kconfig" > > + > > source "drivers/ram/Kconfig" > > > > source "drivers/remoteproc/Kconfig" > > diff --git a/drivers/qe/Kconfig b/drivers/qe/Kconfig new file mode > > 100644 index 0000000..e2dd2e7 > > --- /dev/null > > +++ b/drivers/qe/Kconfig > > @@ -0,0 +1,8 @@ > > +# > > +# QUICC Engine Drivers > > +# > > +config U_QE > > + bool "Enable support for U QUICC Engine" > > + default y if ARCH_LS1021A && !SD_BOOT && !NAND_BOOT > && !QSPI_BOOT > > + help > > + Choose this option to add support for U QUICC Engine. > > > > Since you add Kconfig option, you should migrate all existing #define > CONFIG_U_QE to Kconfig/defconfig. So far only T102x, T1040, LS1021, > LS1043 have this option defined. OK, will cover this in next version.
Regards, Ran > York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
