On 08/09/2018 02:56 AM, Ran Wang wrote: > add Kconfig option for U QUICC Engine. > > Signed-off-by: Ran Wang <ran.wan...@nxp.com> > --- > drivers/Kconfig | 2 ++ > drivers/qe/Kconfig | 8 ++++++++ > 2 files changed, 10 insertions(+) > create mode 100644 drivers/qe/Kconfig > > diff --git a/drivers/Kconfig b/drivers/Kconfig > index c2e813f..da2f811 100644 > --- a/drivers/Kconfig > +++ b/drivers/Kconfig > @@ -68,6 +68,8 @@ source "drivers/power/Kconfig" > > source "drivers/pwm/Kconfig" > > +source "drivers/qe/Kconfig" > + > source "drivers/ram/Kconfig" > > source "drivers/remoteproc/Kconfig" > diff --git a/drivers/qe/Kconfig b/drivers/qe/Kconfig > new file mode 100644 > index 0000000..e2dd2e7 > --- /dev/null > +++ b/drivers/qe/Kconfig > @@ -0,0 +1,8 @@ > +# > +# QUICC Engine Drivers > +# > +config U_QE > + bool "Enable support for U QUICC Engine" > + default y if ARCH_LS1021A && !SD_BOOT && !NAND_BOOT && !QSPI_BOOT > + help > + Choose this option to add support for U QUICC Engine. >
Since you add Kconfig option, you should migrate all existing #define CONFIG_U_QE to Kconfig/defconfig. So far only T102x, T1040, LS1021, LS1043 have this option defined. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot