Add device tree for T2080QDS board and enable CONFIG_OF_CONTROL
so that device tree can be compiled.
Update board README for device tree usage.
Signed-off-by: Jagdish Gediya <jagdish.ged...@nxp.com>
Reviewed-by: Bin Meng <bmeng...@gmail.com>
---
Changes for v2:
- Enable CONFIG_MPC85XX_HAVE_RESET_VECTOR in T2080QDS_defconfig
- README and commit message changes as per Bin Meng's comments
No changes for v3.
arch/powerpc/dts/Makefile | 2 ++
arch/powerpc/dts/e6500_power_isa.dtsi | 39 ++++++++++++++++++++++
arch/powerpc/dts/t2080.dtsi | 62 +++++++++++++++++++++++++++++++++++
arch/powerpc/dts/t2080qds.dts | 17 ++++++++++
board/freescale/t208xqds/README | 19 +++++++++++
configs/T2080QDS_NAND_defconfig | 3 +-
configs/T2080QDS_SDCARD_defconfig | 3 +-
configs/T2080QDS_SPIFLASH_defconfig | 3 +-
configs/T2080QDS_defconfig | 4 ++-
9 files changed, 148 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/dts/e6500_power_isa.dtsi
create mode 100644 arch/powerpc/dts/t2080.dtsi
create mode 100644 arch/powerpc/dts/t2080qds.dts
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
index de14e7b..a19aa56 100644
--- a/arch/powerpc/dts/Makefile
+++ b/arch/powerpc/dts/Makefile
@@ -1,5 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
+dtb-$(CONFIG_TARGET_T2080QDS) += t2080qds.dtb
+
targets += $(dtb-y)
# Add any required device tree compiler flags here
diff --git a/arch/powerpc/dts/e6500_power_isa.dtsi
b/arch/powerpc/dts/e6500_power_isa.dtsi
new file mode 100644
index 0000000..1b06170
--- /dev/null
+++ b/arch/powerpc/dts/e6500_power_isa.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * e6500 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2018 NXP
+ */
+
+/ {
+ cpus {
+ power-isa-version = "2.06";
+ power-isa-b; // Base
+ power-isa-e; // Embedded
+ power-isa-atb; // Alternate Time Base
+ power-isa-cs; // Cache Specification
+ power-isa-ds; // Decorated Storage
+ power-isa-e.ed; // Embedded.Enhanced Debug
+ power-isa-e.pd; // Embedded.External PID
+ power-isa-e.hv; // Embedded.Hypervisor
+ power-isa-e.le; // Embedded.Little-Endian
+ power-isa-e.pm; // Embedded.Performance Monitor
+ power-isa-e.pc; // Embedded.Processor Control
+ power-isa-ecl; // Embedded Cache Locking
+ power-isa-exp; // External Proxy
+ power-isa-fp; // Floating Point
+ power-isa-fp.r; // Floating Point.Record
+ power-isa-mmc; // Memory Coherence
+ power-isa-scpm; // Store Conditional Page Mobility
+ power-isa-wt; // Wait
+ power-isa-64; // 64-bit
+ power-isa-e.pt; // Embedded.Page Table
+ power-isa-e.hv.lrat; // Embedded.Hypervisor.LRAT
+ power-isa-e.em; // Embedded Multi-Threading
+ power-isa-v; // Vector (AltiVec)
+ fsl,eref-er; // Enhanced Reservations
+ fsl,eref-deo; // Data Cache Extended Operations
+ mmu-type = "power-embedded";
+ };
+};
diff --git a/arch/powerpc/dts/t2080.dtsi b/arch/powerpc/dts/t2080.dtsi
new file mode 100644
index 0000000..db65ea5
--- /dev/null
+++ b/arch/powerpc/dts/t2080.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * T2080/T2081 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2018 NXP
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e6500@0 {
+ device_type = "cpu";
+ reg = <0 1>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu1: PowerPC,e6500@2 {
+ device_type = "cpu";
+ reg = <2 3>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu2: PowerPC,e6500@4 {
+ device_type = "cpu";
+ reg = <4 5>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ cpu3: PowerPC,e6500@6 {
+ device_type = "cpu";
+ reg = <6 7>;
+ fsl,portid-mapping = <0x80000000>;
+ };
+ };
+
+ soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic";
+ device_type = "open-pic";
+ clock-frequency = <0x0>;
+ };
+ };
+};
diff --git a/arch/powerpc/dts/t2080qds.dts b/arch/powerpc/dts/t2080qds.dts
new file mode 100644
index 0000000..1819a08
--- /dev/null
+++ b/arch/powerpc/dts/t2080qds.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * T2080QDS Device Tree Source
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ * Copyright 2018 NXP
+ */
+
+/include/ "t2080.dtsi"
+
+/ {
+ model = "fsl,T2080QDS";
+ compatible = "fsl,T2080QDS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+};
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
index 2a2a0e5..d690857 100755
--- a/board/freescale/t208xqds/README
+++ b/board/freescale/t208xqds/README
@@ -272,3 +272,22 @@ How to update the ucode of Freescale FMAN
For more details, please refer to T2080QDS User Guide and access
website www.freescale.com and Freescale QorIQ SDK Infocenter document.
+
+Device tree support and how to enable it for different configs
+--------------------------------------------------------------
+Device tree support is available for t2080qds for below mentioned boot,
+1. NOR Boot
+2. NAND Boot
+3. SD Boot
+4. SPIFLASH Boot
+
+To enable device tree support for other boot, below configs need to be
+enabled in relative defconfig file,
+1. CONFIG_DEFAULT_DEVICE_TREE="t2080qds" (Change default device tree name if
required)
+2. CONFIG_OF_CONTROL
+3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
+ CONFIG_RESET_VECTOR_ADDRESS - 0xffc
+
+If device tree support is enabled in defconfig,
+1. use 'u-boot-with-dtb.bin' for NOR boot.
+2. use 'u-boot-with-spl-pbl.bin' for other boot.
diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig
index 6b5de4d..4a39cd2 100644
--- a/configs/T2080QDS_NAND_defconfig
+++ b/configs/T2080QDS_NAND_defconfig
@@ -7,6 +7,7 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -35,6 +36,7 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
+CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -54,4 +56,3 @@ CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2080QDS_SDCARD_defconfig
b/configs/T2080QDS_SDCARD_defconfig
index a203582..c89c63d 100644
--- a/configs/T2080QDS_SDCARD_defconfig
+++ b/configs/T2080QDS_SDCARD_defconfig
@@ -8,6 +8,7 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -35,6 +36,7 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
+CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -53,4 +55,3 @@ CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2080QDS_SPIFLASH_defconfig
b/configs/T2080QDS_SPIFLASH_defconfig
index 6528eea..b5f960f 100644
--- a/configs/T2080QDS_SPIFLASH_defconfig
+++ b/configs/T2080QDS_SPIFLASH_defconfig
@@ -9,6 +9,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -36,6 +37,7 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
+CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -54,4 +56,3 @@ CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig
index 4a5cbb2..b34a0f5 100644
--- a/configs/T2080QDS_defconfig
+++ b/configs/T2080QDS_defconfig
@@ -2,6 +2,7 @@ CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
@@ -24,6 +25,8 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_FSL_CAAM=y
CONFIG_FSL_ESDHC=y
@@ -42,4 +45,3 @@ CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
