ls1088ardb-pb is another varinat of the ls1088ardb.
This board support two m.2 x2 gen 3 pcie card slot.
There is no support of sata, pcie standard slot,
miniPCIE slot and TDM in this board.
Signed-off-by: Pramod Kumar <pramod.kuma...@nxp.com>
---
Changes in v2:
- Fix the compilation issue when building u-boot for SD boot.
arch/arm/Kconfig | 14 +++
arch/arm/cpu/armv8/Kconfig | 1 +
board/freescale/ls1088a/Kconfig | 43 +++++++
board/freescale/ls1088a/MAINTAINERS | 18 +++
board/freescale/ls1088a/Makefile | 1 +
board/freescale/ls1088a/ddr.h | 6 +-
board/freescale/ls1088a/ls1088a.c | 25 +++-
... ls1088ardb_pb_qspi_SECURE_BOOT_defconfig} | 2 +-
...defconfig => ls1088ardb_pb_qspi_defconfig} | 2 +-
...ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig} | 2 +-
...ig => ls1088ardb_pb_sdcard_qspi_defconfig} | 2 +-
include/configs/ls1088ardb_pb.h | 113 ++++++++++++++++++
12 files changed, 219 insertions(+), 10 deletions(-)
copy configs/{ls1088ardb_qspi_SECURE_BOOT_defconfig =>
ls1088ardb_pb_qspi_SECURE_BOOT_defconfig} (97%)
copy configs/{ls1088ardb_qspi_defconfig => ls1088ardb_pb_qspi_defconfig} (97%)
copy configs/{ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig =>
ls1088ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig} (98%)
copy configs/{ls1088ardb_sdcard_qspi_defconfig =>
ls1088ardb_pb_sdcard_qspi_defconfig} (98%)
create mode 100644 include/configs/ls1088ardb_pb.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 63ec02403a..a653823934 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1120,6 +1120,20 @@ config TARGET_LS1088ARDB
development platform that supports the QorIQ LS1088A
Layerscape Architecture processor.
+config TARGET_LS1088ARDB_PB
+ bool "Support ls1088ardb_pb"
+ select ARCH_LS1088A
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select ARCH_MISC_INIT
+ select BOARD_LATE_INIT
+ select SUPPORT_SPL
+ help
+ Support for NXP LS1088ARDB_PB platform.
+ The LS1088A Reference design board (RDB_PB) is a high-performance
+ development platform that supports the QorIQ LS1088A
+ Layerscape Architecture processor.
+
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select ARCH_LS1021A
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index c8bebabdf6..8ede276b65 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -100,6 +100,7 @@ config PSCI_RESET
!TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
!TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
!TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
+ !TARGET_LS1088ARDB_PB && \
!TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
!TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
!TARGET_LS1012AFRWY && \
diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig
index 8bb828e3fd..9f20d7247f 100644
--- a/board/freescale/ls1088a/Kconfig
+++ b/board/freescale/ls1088a/Kconfig
@@ -59,3 +59,46 @@ endif
source "board/freescale/common/Kconfig"
endif
+
+if TARGET_LS1088ARDB_PB
+
+config SYS_BOARD
+ default "ls1088a"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+ default "ls1088ardb_pb"
+
+if SYS_LS_PPA_FW_IN_XIP
+
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x20400000
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+ hex "PPA Firmware HDR Addr"
+ default 0x20680000
+endif
+endif
+
+if (SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND)
+
+config SYS_LS_PPA_FW_ADDR
+ hex "PPA Firmware Addr"
+ default 0x400000
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+ hex "PPA Firmware HDR Addr"
+ default 0x680000
+endif
+endif
+
+source "board/freescale/common/Kconfig"
+endif
diff --git a/board/freescale/ls1088a/MAINTAINERS
b/board/freescale/ls1088a/MAINTAINERS
index 4d804d9447..5d841076bc 100644
--- a/board/freescale/ls1088a/MAINTAINERS
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -7,6 +7,14 @@ F: include/configs/ls1088ardb.h
F: configs/ls1088ardb_qspi_defconfig
F: configs/ls1088ardb_sdcard_qspi_defconfig
+LS1088ARDB_PB BOARD
+M: Pramod Kumar <pramod.ku...@nxp.com>
+S: Maintained
+F: board/freescale/ls1088a/
+F: include/configs/ls1088ardb_pb.h
+F: configs/ls1088ardb_pb_qspi_defconfig
+F: configs/ls1088ardb_pb_sdcard_qspi_defconfig
+
LS1088AQDS BOARD
M: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>
M: Ashish Kumar <ashish.ku...@nxp.com>
@@ -34,3 +42,13 @@ LS1088ARDB_SD_SECURE_BOOT BOARD
M: Sumit Garg <sumit.g...@nxp.com>
S: Maintained
F: configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+
+LS1088ARDB_PB_QSPI_SECURE_BOOT BOARD
+M: Udit Agarwal <udit.agar...@nxp.com>
+S: Maintained
+F: configs/ls1088ardb_pb_qspi_SECURE_BOOT_defconfig
+
+LS1088ARDB_PB_SD_SECURE_BOOT BOARD
+M: Udit Agarwal <udit.agar...@nxp.com>
+S: Maintained
+F: configs/ls1088ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig
diff --git a/board/freescale/ls1088a/Makefile b/board/freescale/ls1088a/Makefile
index c2b0e7dc0f..dd5f365378 100644
--- a/board/freescale/ls1088a/Makefile
+++ b/board/freescale/ls1088a/Makefile
@@ -6,5 +6,6 @@ obj-y += ls1088a.o
obj-y += ddr.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o
+obj-$(CONFIG_TARGET_LS1088ARDB_PB) += eth_ls1088ardb.o
obj-$(CONFIG_TARGET_LS1088AQDS) += eth_ls1088aqds.o
endif
diff --git a/board/freescale/ls1088a/ddr.h b/board/freescale/ls1088a/ddr.h
index b35c4ae2da..7a76f6bd50 100644
--- a/board/freescale/ls1088a/ddr.h
+++ b/board/freescale/ls1088a/ddr.h
@@ -1,6 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2017 NXP
+ * Copyright 2017-2018 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __LS1088A_DDR_H__
@@ -27,7 +29,7 @@ static const struct board_specific_parameters udimm0[] = {
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl
* ranks| mhz| GB |adjst| start | ctl2 | ctl3
*/
-#if defined(CONFIG_TARGET_LS1088ARDB)
+#if defined(CONFIG_TARGET_LS1088ARDB) || defined(CONFIG_TARGET_LS1088ARDB_PB)
{2, 1666, 0, 8, 8, 0x090A0B0E, 0x0F10110D,},
{2, 1900, 0, 8, 9, 0x0A0B0C10, 0x1112140E,},
diff --git a/board/freescale/ls1088a/ls1088a.c
b/board/freescale/ls1088a/ls1088a.c
index a0dab6fc2e..f69d71b1dd 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -1,6 +1,8 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2017 NXP
+ * Copyright 2017-2018 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
@@ -28,6 +30,15 @@
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_TARGET_LS1088ARDB_PB
+int fixup_ls1088ardb_pb_banner(void *fdt)
+{
+ fdt_setprop_string(fdt, 0, "model", "LS1088ARDB-PB Board");
+
+ return 0;
+}
+#endif
+
int board_early_init_f(void)
{
#if defined(CONFIG_SYS_I2C_EARLY_INIT) && defined(CONFIG_TARGET_LS1088AQDS)
@@ -78,6 +89,9 @@ int checkboard(void)
#ifdef CONFIG_TARGET_LS1088AQDS
printf("Board: LS1088A-QDS, ");
+
+#elif CONFIG_TARGET_LS1088ARDB_PB
+ printf("Board: LS1088ARDB-PB, ");
#else
printf("Board: LS1088A-RDB, ");
#endif
@@ -327,7 +341,7 @@ void board_retimer_init(void)
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
-#ifdef CONFIG_TARGET_LS1088ARDB
+#if defined(CONFIG_TARGET_LS1088ARDB) || defined(CONFIG_TARGET_LS1088ARDB_PB)
u8 brdcfg5;
if (hwconfig("esdhc-force-sd")) {
@@ -459,7 +473,7 @@ exit:
int board_init(void)
{
init_final_memctl_regs();
-#if defined(CONFIG_TARGET_LS1088ARDB) && defined(CONFIG_FSL_MC_ENET)
+#if defined(CONFIG_TARGET_LS1088ARDB) || defined(CONFIG_TARGET_LS1088ARDB_PB)
&& defined(CONFIG_FSL_MC_ENET)
u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE;
#endif
@@ -470,7 +484,7 @@ int board_init(void)
gd->env_addr = (ulong)&default_environment[0];
#endif
-#if defined(CONFIG_TARGET_LS1088ARDB) && defined(CONFIG_FSL_MC_ENET)
+#if defined(CONFIG_TARGET_LS1088ARDB) || defined(CONFIG_TARGET_LS1088ARDB_PB)
&& defined(CONFIG_FSL_MC_ENET)
/* invert AQR105 IRQ pins polarity */
out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR105_IRQ_MASK);
#endif
@@ -584,6 +598,9 @@ int ft_board_setup(void *blob, bd_t *bd)
return err;
#endif
+#ifdef CONFIG_TARGET_LS1088ARDB_PB
+fixup_ls1088ardb_pb_banner(blob);
+#endif
return 0;
}
#endif
diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
b/configs/ls1088ardb_pb_qspi_SECURE_BOOT_defconfig
similarity index 97%
copy from configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
copy to configs/ls1088ardb_pb_qspi_SECURE_BOOT_defconfig
index d0334a239f..d2faf25f39 100644
--- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_pb_qspi_SECURE_BOOT_defconfig
@@ -1,5 +1,5 @@
CONFIG_ARM=y
-CONFIG_TARGET_LS1088ARDB=y
+CONFIG_TARGET_LS1088ARDB_PB=y
CONFIG_SYS_TEXT_BASE=0x20100000
CONFIG_SECURE_BOOT=y
CONFIG_FSL_LS_PPA=y
diff --git a/configs/ls1088ardb_qspi_defconfig
b/configs/ls1088ardb_pb_qspi_defconfig
similarity index 97%
copy from configs/ls1088ardb_qspi_defconfig
copy to configs/ls1088ardb_pb_qspi_defconfig
index d806966540..cb9eac88a9 100644
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_pb_qspi_defconfig
@@ -1,5 +1,5 @@
CONFIG_ARM=y
-CONFIG_TARGET_LS1088ARDB=y
+CONFIG_TARGET_LS1088ARDB_PB=y
CONFIG_SYS_TEXT_BASE=0x20100000
CONFIG_FSL_LS_PPA=y
CONFIG_QSPI_AHB_INIT=y
diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
b/configs/ls1088ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig
similarity index 98%
copy from configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
copy to configs/ls1088ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig
index 08b9caeb34..0216974ca7 100644
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig
@@ -1,5 +1,5 @@
CONFIG_ARM=y
-CONFIG_TARGET_LS1088ARDB=y
+CONFIG_TARGET_LS1088ARDB_PB=y
CONFIG_SYS_TEXT_BASE=0x80400000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig
b/configs/ls1088ardb_pb_sdcard_qspi_defconfig
similarity index 98%
copy from configs/ls1088ardb_sdcard_qspi_defconfig
copy to configs/ls1088ardb_pb_sdcard_qspi_defconfig
index bf1c0a2d7b..c501795ef0 100644
--- a/configs/ls1088ardb_sdcard_qspi_defconfig
+++ b/configs/ls1088ardb_pb_sdcard_qspi_defconfig
@@ -1,5 +1,5 @@
CONFIG_ARM=y
-CONFIG_TARGET_LS1088ARDB=y
+CONFIG_TARGET_LS1088ARDB_PB=y
CONFIG_SYS_TEXT_BASE=0x80400000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
diff --git a/include/configs/ls1088ardb_pb.h b/include/configs/ls1088ardb_pb.h
new file mode 100644
index 0000000000..8f4612ae65
--- /dev/null
+++ b/include/configs/ls1088ardb_pb.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2018 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1088A_RDB_PB_H
+#define __LS1088A_RDB_PB_H
+
+#include "ls1088ardb.h"
+
+#ifndef SPL_NO_ENV
+/* Initial environment variables */
+#if defined(CONFIG_QSPI_BOOT)
+#define MC_INIT_CMD \
+ "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
+ "sf read 0x80100000 0xE00000 0x100000;" \
+ "env exists secureboot && " \
+ "sf read 0x80700000 0x700000 0x40000 && " \
+ "sf read 0x80740000 0x740000 0x40000 && " \
+ "esbc_validate 0x80700000 && " \
+ "esbc_validate 0x80740000 ;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000\0"
+#elif defined(CONFIG_SD_BOOT)
+#define MC_INIT_CMD \
+ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+ "mmc read 0x80100000 0x7000 0x800;" \
+ "env exists secureboot && " \
+ "mmc read 0x80700000 0x3800 0x10 && " \
+ "mmc read 0x80740000 0x3A00 0x10 && " \
+ "esbc_validate 0x80700000 && " \
+ "esbc_validate 0x80740000 ;" \
+ "fsl_mc start mc 0x80000000 0x80100000\0" \
+ "mcmemsize=0x70000000\0"
+#endif
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "BOARD=ls1088ardb_pb\0" \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x1000000\0" \
+ "kernel_addr_sd=0x8000\0" \
+ "kernelhdr_addr_sd=0x4000\0" \
+ "kernel_start=0x580100000\0" \
+ "kernelheader_start=0x580800000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr=0x800000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "kernelheader_size=0x40000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "kernel_size_sd=0x14000\0" \
+ "kernelhdr_size_sd=0x10\0" \
+ MC_INIT_CMD \
+ BOOTENV \
+ "boot_scripts=ls1088ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1088ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "env exists mcinitcmd && run mcinitcmd && " \
+ "mmc read 0x80001000 0x6800 0x800;" \
+ "fsl_mc lazyapply dpl 0x80001000;" \
+ "bootm $load_addr#ls1088ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size ; env exists secureboot " \
+ "&& sf read $kernelheader_addr_r $kernelheader_addr " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ "bootm $load_addr#ls1088ardb\0" \
+ "sd_bootcmd=echo Trying load from sd card..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd ;" \
+ "env exists secureboot && mmc read $kernelheader_addr_r "\
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#ls1088ardb\0"
+
+#endif
+#endif /* __LS1088A_RDB_H */
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
