On 09/24/2018 02:29 AM, Pramod Kumar wrote:
>
>
>> -----Original Message-----
>> From: York Sun
>> Sent: Friday, September 21, 2018 8:20 PM
>> To: Pramod Kumar <pramod.kuma...@nxp.com>
>> Cc: u-boot@lists.denx.de
>> Subject: Re: [PATCH v2] ls1088ardb_pb: Add support for ls1088ardb_pb
>> board.
>>
>> On 08/21/2018 02:18 AM, Pramod Kumar wrote:
>>> ls1088ardb-pb is another varinat of the ls1088ardb.
>>> This board support two m.2 x2 gen 3 pcie card slot.
>>> There is no support of sata, pcie standard slot, miniPCIE slot and TDM
>>> in this board.
>>>
>>> Signed-off-by: Pramod Kumar <pramod.kuma...@nxp.com>
>>> ---
>>> Changes in v2:
>>> - Fix the compilation issue when building u-boot for SD boot.
>>>
>>> arch/arm/Kconfig | 14 +++
>>> arch/arm/cpu/armv8/Kconfig | 1 +
>>> board/freescale/ls1088a/Kconfig | 43 +++++++
>>> board/freescale/ls1088a/MAINTAINERS | 18 +++
>>> board/freescale/ls1088a/Makefile | 1 +
>>> board/freescale/ls1088a/ddr.h | 6 +-
>>> board/freescale/ls1088a/ls1088a.c | 25 +++-
>>> ... ls1088ardb_pb_qspi_SECURE_BOOT_defconfig} | 2 +-
>>> ...defconfig => ls1088ardb_pb_qspi_defconfig} | 2 +-
>>> ...ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig} | 2 +-
>>> ...ig => ls1088ardb_pb_sdcard_qspi_defconfig} | 2 +-
>>> include/configs/ls1088ardb_pb.h | 113 ++++++++++++++++++
>>> 12 files changed, 219 insertions(+), 10 deletions(-) copy
>>> configs/{ls1088ardb_qspi_SECURE_BOOT_defconfig =>
>>> ls1088ardb_pb_qspi_SECURE_BOOT_defconfig} (97%) copy
>>> configs/{ls1088ardb_qspi_defconfig => ls1088ardb_pb_qspi_defconfig}
>>> (97%) copy configs/{ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig =>
>>> ls1088ardb_pb_sdcard_qspi_SECURE_BOOT_defconfig} (98%) copy
>>> configs/{ls1088ardb_sdcard_qspi_defconfig =>
>>> ls1088ardb_pb_sdcard_qspi_defconfig} (98%) create mode 100644
>>> include/configs/ls1088ardb_pb.h
>>>
>>
>> Is it possible to reuse ls1088ardb and detect the board at runtime?
>>>
>>> For distro boot we need diffrent board variable for ls1088ardb and
>>> ls1088ardb_pb, which can only be
>>> achieved by using config tagets CONFIG_TARGET_LS1088ARDB and
>>> CONFIG_TARGET_LS1088ARDB_PB respectively
> f>> or both the boards.
First, please use proper prefix for quotation and reply. It makes
reading easier.
If your only concern is default variable for distroboot, you can update
the default variable at runtime.
York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
