Below is the sequence to embed dtb inside u-boot, 1. Remove bootpg and resetvec section if needed 2. Append dtb 3. Append bootpg and resetvec section back if removed previously
Above procedure is required only when CONFIG_MPC85xx, CONFIG_BINMAN and CONFIG_OF_SEPARATE are defined. set PPC_MPC85XX_INCLUDE_DTB variable in Makefile if binman need to be used. set PPC_MPC85XX_REMOVE_BOOTPG_RESETVEC variable in Makefile if bootpg and resetvec section need to be removed before appending dtb. Signed-off-by: Jagdish Gediya <jagdish.ged...@nxp.com> --- Makefile | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 884b7d9..aad9dca 100644 --- a/Makefile +++ b/Makefile @@ -797,6 +797,13 @@ else DO_STATIC_RELA = endif +ifeq ($(CONFIG_MPC85xx)$(CONFIG_BINMAN)$(CONFIG_OF_SEPARATE),yyy) +PPC_MPC85XX_INCLUDE_DTB := y +ifeq ($(CONFIG_SYS_MPC85XX_NO_RESETVEC)$(CONFIG_NAND),) +PPC_MPC85XX_REMOVE_BOOTPG_RESETVEC := y +endif +endif + # Always append ALL so that arch config.mk's can add custom ones ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check @@ -837,6 +844,10 @@ ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),) ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom endif +ifeq ($(PPC_MPC85XX_INCLUDE_DTB),y) +ALL-y += u-boot-dtb.bin +endif + # Build a combined spl + u-boot image for sunxi ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy) ALL-y += u-boot-sunxi-with-spl.bin @@ -938,7 +949,7 @@ u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob u-boot.bin: u-boot-fit-dtb.bin FORCE $(call if_changed,copy) -else ifeq ($(CONFIG_OF_SEPARATE),y) +else ifeq ($(CONFIG_OF_SEPARATE)$(PPC_MPC85XX_INCLUDE_DTB),y) u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE $(call if_changed,cat) @@ -979,7 +990,8 @@ spl/u-boot-spl.srec: spl/u-boot-spl FORCE $(call if_changed,objcopy) OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \ - $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) + $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \ + $(if $(PPC_MPC85XX_REMOVE_BOOTPG_RESETVEC),-R .bootpg -R .resetvec) binary_size_check: u-boot-nodtb.bin FORCE @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \ @@ -1222,6 +1234,18 @@ u-boot-x86-16bit.bin: u-boot FORCE $(call if_changed,objcopy) endif +ifeq ($(PPC_MPC85XX_INCLUDE_DTB), y) +u-boot-dtb.bin: u-boot.bin u-boot.dtb \ + $(if $(PPC_MPC85XX_REMOVE_BOOTPG_RESETVEC), u-boot-br.bin) FORCE + $(call if_changed,binman) + +ifeq ($(PPC_MPC85XX_REMOVE_BOOTPG_RESETVEC),y) +OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec +u-boot-br.bin: u-boot FORCE + $(call if_changed,objcopy) +endif +endif + ifneq ($(CONFIG_ARCH_SUNXI),) ifeq ($(CONFIG_ARM64),) u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE @@ -1291,6 +1315,8 @@ spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE ifeq ($(ARCH),arm) UBOOT_BINLOAD := u-boot.img +else ifeq ($(PPC_MPC85XX_INCLUDE_DTB),y) +UBOOT_BINLOAD := u-boot-dtb.bin else UBOOT_BINLOAD := u-boot.bin endif -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot