Hello Wolfgang,
in the message <20100316190012.84ca750...@gemini.denx.de> form
16.03.2010 at 09:00 PM
+#ifdef CONFIG_LCD
+/*
+ * LCD name TX09D50VM1CCA
+ */
+vidinfo_t panel_info = {
+ vl_col: 240,
+ vl_row: 320,
+ vl_clk: 4965000,
+ vl_sync: ATMEL_LCDC_INVLINE_NORMAL |
+ ATMEL_LCDC_INVFRAME_NORMAL,
+ vl_bpix: 3,
+ vl_tft: 1,
+ vl_hsync_len: 5,
+ vl_left_margin: 1,
+ vl_right_margin:33,
+ vl_vsync_len: 1,
+ vl_upper_margin:1,
+ vl_lower_margin:0,
+ mmio: AT91SAM9G45_LCDC_BASE,
+};
This information should not be board-specific. The panel information
is generic and should moved to a separate header file that is not part
of the board code.
In the boards (at91sam9263ek and at91sam9m10g45ek, and some more
at91sam9 based boards) I am looking at, the panel_info is in the board
specific code.
There are some lcd.c files with panel_info structures:
drivers/video/mx3fb.c, cpu/pxa/pxafb.c and cpu/mpc8xx/lcd.c .
Where should be the proper place for panel_info which is somehow
architecture dependent?
Regards,
Asen
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
