Marek Vasut <ma...@denx.de> schrieb am Mo., 6. Aug. 2018, 15:19:
> On 08/06/2018 03:05 PM, Simon Goldschmidt wrote:
> > This fixes the board's dts to supply SPL with QSPI info.
> >
> > The EBV Socrates board has DIP switches to boot from SD card or
> > QSPI, so let's fix its defconfig to work for both cases.
> >
> > Signed-off-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com>
> >
> > ---
> >
> > arch/arm/dts/socfpga_cyclone5_socrates.dts | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm/dts/socfpga_cyclone5_socrates.dts
> b/arch/arm/dts/socfpga_cyclone5_socrates.dts
> > index 0d452ae300..46d7eabdc8 100644
> > --- a/arch/arm/dts/socfpga_cyclone5_socrates.dts
> > +++ b/arch/arm/dts/socfpga_cyclone5_socrates.dts
> > @@ -63,6 +63,7 @@
> >
> > &qspi {
> > status = "okay";
> > + u-boot,dm-pre-reloc;
> >
> > flash0: n25q00@0 {
> > #address-cells = <1>;
> > @@ -77,6 +78,7 @@
> > cdns,tsd2d-ns = <50>;
> > cdns,tchsh-ns = <4>;
> > cdns,tslch-ns = <4>;
> > + u-boot,dm-pre-reloc;
> > };
> > };
> >
> >
> But the SoCrates boots from SDMMC :-)
>
Yours might :-)
As written above, the board has an 8 digit dip switch to control both hps
and fpga boot sources. And I use this board to verify that mainline U-Boot
(without our private board configs, which boot from qspi) works on the
architecture.
Simon Goldschmidt
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
