Tom wrote: > Daniel Gorsulowski wrote: >> Hello Tom >> >> Daniel Gorsulowski wrote: >>> * convert otc570 board to use c stucture SoC access >>> * change gpio access to at91_gpio syntax >>> >>> Signed-off-by: Daniel Gorsulowski <daniel.gorsulow...@esd.eu> >>> --- >>> This patch requires Jens Scharsigs new SoC access patchset. >>> http://lists.denx.de/pipermail/u-boot/2010-February/067424.html >>> http://lists.denx.de/pipermail/u-boot/2010-February/067425.html >>> http://lists.denx.de/pipermail/u-boot/2010-February/067426.html >>> http://lists.denx.de/pipermail/u-boot/2010-February/067427.html >>> http://lists.denx.de/pipermail/u-boot/2010-February/067428.html >>> http://lists.denx.de/pipermail/u-boot/2010-February/067429.html >>> http://lists.denx.de/pipermail/u-boot/2010-February/067430.html >>> http://lists.denx.de/pipermail/u-boot/2010-February/067431.html >>> http://lists.denx.de/pipermail/u-boot/2010-February/067432.html >>> >> ... >> >> I recognized, you didn't apply this patch yet. Is there any reason, or >> did you >> simply slip this patch? >> >> Btw. I'm also missing this patch: >> http://lists.denx.de/pipermail/u-boot/2010-February/067779.html >> > > Yes. > This was slipped. > I spent some time trying to work out which patches needed to be > applied to remove the build errors I was seeing with otc but > was unable to. > > Please send me the list of patches and oder of application. > > Tom > I just checked out u-boot-arm repository and applied my otc570 patch and Jens Scharsigs patch I mentioned above. [PATCH ARM] updates the at91 main_clock calculation http://lists.denx.de/pipermail/u-boot/2010-February/067779.html
After applying, build runs without errors. Daniel > >> Best regards, >> Daniel Gorsulowski _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
