The falcon mode was never used on this board, there is also no plan to
use it. So drop this dead code.
Signed-off-by: Hannes Schmelzer <oe5...@oevsv.at>
---
board/BuR/brppt1/board.c | 16 ----------------
include/configs/brppt1.h | 14 --------------
2 files changed, 30 deletions(-)
diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c
index ff2a3a2..f970f98 100644
--- a/board/BuR/brppt1/board.c
+++ b/board/BuR/brppt1/board.c
@@ -72,22 +72,6 @@ static const struct ctrl_ioregs ddr3_ioregs = {
.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
};
-#ifdef CONFIG_SPL_OS_BOOT
-/*
- * called from spl_nand.c
- * return 0 for loading linux, return 1 for loading u-boot
- */
-int spl_start_uboot(void)
-{
- if (0 == gpio_get_value(REPSWITCH)) {
- mdelay(1000);
- printf("SPL: entering u-boot instead kernel image.\n");
- return 1;
- }
- return 0;
-}
-#endif /* CONFIG_SPL_OS_BOOT */
-
#define OSC (V_OSCK/1000000)
static const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1};
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 6a210b7..32bb83c 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -44,20 +44,6 @@
#define CONFIG_MTD_DEVICE /* Required for mtdparts */
#endif /* CONFIG_SPI_BOOT, ... */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000
-
-/* RAW SD card / eMMC */
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address
0x120000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
-
-/* NAND */
-#ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000
-#endif /* CONFIG_NAND */
-#endif /* CONFIG_SPL_OS_BOOT */
-
#ifdef CONFIG_NAND
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
