On other OS, not one provided by B&R, it is not guaranteed that there
are factory-settings within a devicetree. So we must not treat the
absence of them as error.
Further we've the fact that on different version of the device-tree
files there are different namings of the factory-settings, we consider
this with searching for an alternative name.

changing things as following:

- don't treat as error if the bootloader version cannot written into
devicetree.

- since the naming of the factory-settings are different in different
versions of the provided device-tree we search for the alternate name
"/fset"

Signed-off-by: Hannes Schmelzer <oe5...@oevsv.at>
---

 board/BuR/common/common.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index 38da36d..01e3078 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -252,15 +252,20 @@ int ft_board_setup(void *blob, bd_t *bd)
 
        nodeoffset = fdt_path_offset(blob, "/factory-settings");
        if (nodeoffset < 0) {
-               puts("set bootloader version 'factory-settings' not in dtb!\n");
-               return -1;
+               printf("%s: cannot find /factory-settings, trying /fset\n",
+                      __func__);
+               nodeoffset = fdt_path_offset(blob, "/fset");
+               if (nodeoffset < 0) {
+                       printf("%s: cannot find /fset.\n", __func__);
+                       return 0;
+               }
        }
+
        if (fdt_setprop(blob, nodeoffset, "bl-version",
                        PLAIN_VERSION, strlen(PLAIN_VERSION)) != 0) {
-               puts("set bootloader version 'bl-version' prop. not in dtb!\n");
-               return -1;
+               printf("%s: no 'bl-version' prop in fdt!\n", __func__);
+               return 0;
        }
-
        return 0;
 }
 
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to