>-----Original Message----- >From: York Sun >Sent: Tuesday, July 3, 2018 8:53 PM >To: Pramod Kumar <pramod.kuma...@nxp.com>; u-boot@lists.denx.de >Subject: Re: [PATCH 1/2 v2] board: freescale: ls1012afrx:Common files to >support > >On 06/06/2018 04:16 AM, Pramod Kumar wrote: >> LS1012A-FRDM and LS1012A-FRWY board. >> >> 1-Move all common files applicable for both boards LS1012A-FRDM >> and LS1012A-FRWY into board directory ls1012afrx. >> 2-Restructure LS1012A-FRDM code. Only board specific files are >> in LS1012A-FRDM board directory. >> >> Signed-off-by: Pramod Kumar <pramod.kuma...@nxp.com> >> --- >> Depends on: >> http://patchwork.ozlabs.org/patch/918935/ >> http://patchwork.ozlabs.org/patch/918933/ >> http://patchwork.ozlabs.org/patch/918932/ >> >> Changes for v2: >> - Rebased patch to above dependency patches >> > >Previous patch 918933 added FRWY board into FRDM Kconfig. If you want to >separate them, send a patch to do that. Don't mix with adding a new board. > For patch http://patchwork.ozlabs.org/patch/926134/ [U-Boot,1/2,v2] board: freescale: ls1012afrx:Common files to support In this patch, i have removed FRWY kconfig support. I have created a new directory "board/freescale/ls1012afrx/" and added common files which are applicable for both FRDM and FRWY. This patch would enable only FRDM board.
For patch http://patchwork.ozlabs.org/patch/926132/ [U-Boot,2/2,v2] board: freescale: ls1012afrwy: Add LS1012A-FRWY board support. This patch create support for FRWY board by creating new directory "/board/freescale/ls1012afrwy". FRWY board would use the common files located in "board/freescale/ls1012afrx/". This patch would enable the FRWY board. >York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
