Hi, We have developed new board with TMS320DM6467, My question here is can I use same the U-boot.bin that came with DM6467 EVM. We are using the RBL supported Nand Device and no change in the memory map. The only I change we are using Nand Flash from different manufacturer Micron.
I have got u-boot 1.2.0 folder, but it contains different folders, could anyone explain if I need to change the configurations for my board what are the files I need to look. If I build the code, whether it will generate the binary file or different format. Thanks, - Balaji S DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect. -----------------------------------------------------------------------------------------------------------------------
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
