于 2018年6月25日 GMT+08:00 下午8:40:21, Jagan Teki <ja...@amarulasolutions.com> 写到: >On Mon, Jun 25, 2018 at 4:07 PM, Icenowy Zheng <icen...@aosc.io> wrote: >> This patch trys to add support for Allwinner H6 SoC to U-Boot. >> >> Allwinner H6 is a quite new Allwinner SoC, with several parts changed >a >> lot (memory map, DRAM controller, CCU, so on). The position which SPL >> will be loaded (SRAM A1) also changed to 0x20000. >> >> The Pine H64 board support comes with this patchset, as this is the >> first H6 board that I can get (being early bird). >> >> Icenowy Zheng (13): >> sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS >> sunxi: add basical memory map definitions of H6 SoC >> sunxi: change RMR64's RVBAR address for H6 >> sunxi: change ATF position for H6 >> sunxi: add config for SPL at 0x20000 on H6 >> sunxi: change GIC address on H6 >> sunxi: add clock code for H6 >> sunxi: use sun6i-style watchdog for H6 >> sunxi: add UART0 setup for H6 >> sunxi: add MMC support for H6 >> sunxi: add DRAM support to H6 >> sunxi: add support for Allwinner H6 SoC >> sunxi: add support for Pine H64 board > >is it on top of master? unable to apply for testing on master, point >me the branch would help.
sunxi/next. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
