From: Christian Gmeiner <christian.gmei...@gmail.com>
If U-Boot gets used as coreboot payload all pci resources got
assigned by coreboot. If a dts without any pci ranges gets used
the dm is not able to access pci device memory. To get things
working make use of a 1:1 mapping for bus <-> phy addresses.
This change makes it possible to get the e1000 U-Boot driver
working on a sandybridge device where U-Boot is used as coreboot
payload.
Signed-off-by: Christian Gmeiner <christian.gmei...@gmail.com>
Reviewed-by: Bin Meng <bmeng...@gmail.com>
[bmeng: fixed 'u-boot' in the commit message]
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
drivers/pci/pci-uclass.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index de4c71b..46e9c71 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -1182,6 +1182,11 @@ static int _dm_pci_bus_to_phys(struct udevice *ctlr,
struct pci_region *res;
int i;
+ if (hose->region_count == 0) {
+ *pa = bus_addr;
+ return 0;
+ }
+
for (i = 0; i < hose->region_count; i++) {
res = &hose->regions[i];
@@ -1245,6 +1250,11 @@ int _dm_pci_phys_to_bus(struct udevice *dev, phys_addr_t
phys_addr,
ctlr = pci_get_controller(dev);
hose = dev_get_uclass_priv(ctlr);
+ if (hose->region_count == 0) {
+ *ba = phys_addr;
+ return 0;
+ }
+
for (i = 0; i < hose->region_count; i++) {
res = &hose->regions[i];
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
