On 24/05/2018 14:57, Marek Vasut wrote:
On 05/24/2018 06:23 PM, DATACOM - Paulo.Zaneti wrote:
On 23/05/2018 20:40, Bin Meng wrote:
Hi,
On Thu, May 24, 2018 at 4:51 AM, DATACOM - Paulo.Zaneti
<paulo.zan...@datacom.com.br> wrote:
On 23/05/2018 15:00, Marek Vasut wrote:
On 05/23/2018 07:52 PM, DATACOM - Paulo.Zaneti wrote:
On 23/05/2018 14:43, Marek Vasut wrote:
On 05/23/2018 07:37 PM, DATACOM - Paulo.Zaneti wrote:
On 23/05/2018 14:03, Marek Vasut wrote:
On 05/23/2018 07:00 PM, DATACOM - Paulo.Zaneti wrote:
Hi,
Hi,
When trying to migrate a board from u-boot version 2016.09 to
version
2018.03, I found a problem with a USB 2.0 device which used to
work
on
version 2016.09.
Does it still happen in u-boot/master ?
Yes, it still happens.
I just tested it with the following commit:
dca268a .travis.yml: Further optimizations
In u-boot version 2016.09 the device appears like this:
2: Mass Storage, USB Revision 2.0
- SanDisk Cruzer Blade 200443243002FB509E64
Let me guess, is this a DWC2-based host ? You didn't mention which
SoC
or USB controller it is.
Cfr https://lists.denx.de/pipermail/u-boot/2016-January/240090.html ,
DWC2 has problems with those sandisk sticks.
No, it is a NXP T1024 SoC.
Do you think it may be a problem with the SoC or NXP USB host driver ?
So that's chipidea ? That one should be reasonably sane.
I don't think so. It uses following drivers:
drivers/usb/host/ehci-fsl.c
drivers/usb/host/ehci-hcd.c
Submit the patch you had in mind and let's see what happens.
I just noticed that this stick needs more time after the
usb_set_address()
call.
I increased the mdelay(10) to mdelay(20) and the "usb start" command
worked.
But the problem is that I am still not convinced that this should be the
solution.
Agreed. Can you bisect to see which commit broke your stick?
Yes. The commit which broke my stick is:
commit c008faa77358bb5b313696dd1d5bb8afa03a6ca2
Author: Bin Meng <bmeng...@gmail.com>
Date: Mon Sep 18 06:40:42 2017 -0700
usb: Only get 64 bytes device descriptor for full speed devices
My first guess was that this commit should be adapted to
"get_descriptor_len()" for USB_SPEED_HIGH too.
But then, I realized that I can bypass this problem by increasing the
mdelay() after usb_set_address() from 10 to 20 msec.
So, I think commit c008faa77358bb5b313696dd1d5bb8afa03a6ca2 is not the
offender one. It probably uncovered another problem with this stick.
That particular lineup of sandisk sticks is trash, I have a few of those
here for testing too.
I will try to get a better understanding before submitting a patch.
Did usb_pgood_delay help ?
Yes. It worked. Thanks for the tip.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
