Hi
Did you have to make changes in cpu/arm_cortex8/start.S file? I don't have to make any changes on DCD table anyway, as it has already produced by freescale for mx51_3stack board Regards Andreas -----Original Message----- From: Eric Bénard [mailto:e...@eukrea.com] Sent: 10 February 2010 13:55 To: Andreas Orfanos Cc: U-Boot user list; sba...@denx.de Subject: Re: [U-Boot] Booting from NAND on MX51 Hi, Le 10/02/2010 13:23, Andreas Orfanos a écrit : > I have set up the right switches on the board, and I can boot RedBoot > from nand without problem. > Therefore it should be easy to do it on u-boot. > we are booting u-boot from NAND on a custom iMX51 board (using mDDR and not DDR2), we started from Freescale's u-boot for 3 Stack board (it's in their BSP which can be downloaded from their website) and customized it to our hardware as we have many changes vs the reference design. We are using a customized DCD table to configure the CPU and it works fine. Eric _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
