On 15 May 2018 at 19:57, Miquel Raynal <miquel.ray...@bootlin.com> wrote:
> On some designs, the reset line could not be connected to the SoC reset
> line, in this case, request the GPIO and ensure the chip gets reset.
>
> Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
> ---
> drivers/tpm/tpm2_tis_spi.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
Reviewed-by: Simon Glass <s...@chromium.org>
Question below
>
> diff --git a/drivers/tpm/tpm2_tis_spi.c b/drivers/tpm/tpm2_tis_spi.c
> index 6a4d5284c9..1c7f8f3673 100644
> --- a/drivers/tpm/tpm2_tis_spi.c
> +++ b/drivers/tpm/tpm2_tis_spi.c
> @@ -24,6 +24,9 @@
> #include <linux/compiler.h>
> #include <linux/types.h>
> #include <linux/unaligned/be_byteshift.h>
> +#ifdef CONFIG_DM_GPIO
> +#include <asm-generic/gpio.h>
> +#endif
>
> #include "tpm_tis.h"
> #include "tpm_internal.h"
> @@ -574,6 +577,20 @@ static int tpm_tis_spi_probe(struct udevice *dev)
> struct tpm_chip_priv *priv = dev_get_uclass_priv(dev);
> struct tpm_chip *chip = dev_get_priv(dev);
> int ret;
> +#ifdef CONFIG_DM_GPIO
Can this use if (IS_ENABLED(CONFIG_DM_GPIO)) ?
It helps to improve build coverage.
> + struct gpio_desc reset_gpio;
> +
> + ret = gpio_request_by_name(dev, "gpio-reset", 0,
> + &reset_gpio, GPIOD_IS_OUT);
> + if (ret) {
> + log(LOGC_NONE, LOGL_NOTICE, "%s: missing reset GPIO\n",
> + __func__);
> + } else {
> + dm_gpio_set_value(&reset_gpio, 0);
> + mdelay(1);
> + dm_gpio_set_value(&reset_gpio, 1);
> + }
> +#endif
>
> /* Ensure a minimum amount of time elapsed since reset of the TPM */
> mdelay(drv_data->time_before_first_cmd_ms);
> --
> 2.14.1
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
