On 19.4.2018 09:07, Siva Durga Prasad Paladugu wrote: > This patch series is meant to add SD3.0 support for ZynqMP > platform. > The first five patches in the series mostly setting up > things in sdhci layer to support SD3.0 , the sixth patch > is to add SD3.0 support for ZynqMP platform and the last > patch is to enable this support for ZynqMP zcu102 rev1.0 > eval board. > > Siva Durga Prasad Paladugu (7): > mmc: sdhci: Add support for disabling clock > mmc: sdhci: Handle execute tuning command in sdhci_send_command > sdhci: Add new sdhci ops for platform specific tuning and delays > mmc: sdhci: Invoke platform specific tuning and delay routines > mmc : sdhci: Read capabilities register1 and update host caps > mmc: zynq_sdhci: Add support for SD3.0 > zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board > > board/xilinx/zynqmp/Makefile | 2 + > board/xilinx/zynqmp/tap_delays.c | 229 +++++++++++++++++++++++++ > configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 2 + > drivers/mmc/sdhci.c | 63 ++++++- > drivers/mmc/zynq_sdhci.c | 231 > +++++++++++++++++++++++++- > include/sdhci.h | 8 + > include/zynqmp_tap_delay.h | 20 +++ > 7 files changed, 547 insertions(+), 8 deletions(-) > create mode 100644 board/xilinx/zynqmp/tap_delays.c > create mode 100644 include/zynqmp_tap_delay.h >
Applied to xilinx tree. Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
