Hi Alex,
> On Tue, May 8, 2018 at 10:21 AM Lukasz Majewski <lu...@denx.de> wrote:
>
> > Hi Alex,
>
> > > On Tue, May 8, 2018 at 8:41 AM Lukasz Majewski <lu...@denx.de>
> > > wrote:
> > > > On Tue, 08 May 2018 05:15:13 +0000
> > > > Alex Kiernan <alex.kier...@gmail.com> wrote:
> > >
> > > > > On Wed, May 2, 2018 at 3:11 PM Lukasz Majewski <lu...@denx.de>
> > > > > wrote:
> > > > > > Those two functions can be used to provide easy bootcount
> > > > > > management.
> > > > >
> > > > > > Signed-off-by: Lukasz Majewski <lu...@denx.de>
> > > > >
> > > > > > Reviewed-by: Tom Rini <tr...@konsulko.com>
> > > > > > Reviewed-by: Stefan Roese <s...@denx.de>
> > > > > > ---
> > > > >
> > > > > > Changes in v5:
> > > > > > - Provide parenthesis for #if defined(FOO) && ...
> > > > >
> > > > > > Changes in v4:
> > > > > > - Remove enum bootcount_context and replace it with checking
> > > > > > gd_t->flags (The GD_FLG_SPL_INIT is only set in SPL, it is
> > > > > > cleared in u-boot proper, so can be used as indication if we
> > > > > > are in u-boot or SPL).
> > > > > > - Do not call bootcount_store() twice when it is not needed.
> > > > > > - Call env_set_ulong("bootcount", bootcount); only in NON
> > > > > > SPL context - Boards with TINY_PRINTF (in newest mainline)
> > > > > > will build break as this
> > > > > function
> > > > > > requires simple_itoa() from vsprintf.c (now not always
> > > > > > build in SPL).
> > > > >
> > > > > > Changes in v3:
> > > > > > - Unify those functions to also work with common/autoboot.c
> > > > > > code
> > > > > > - Add enum bootcount_context to distinguish between u-boot
> > > > > > proper and SPL
> > > > >
> > > > > > Changes in v2:
> > > > > > - None
> > > > >
> > > > > > include/bootcount.h | 47
> > > > > > +++++++++++++++++++++++++++++++++++++++++++++++ 1 file
> > > > > > changed, 47 insertions(+)
> > > > >
> > > > > > diff --git a/include/bootcount.h b/include/bootcount.h
> > > > > > index e3b3f7028e..a886c98f44 100644
> > > > > > --- a/include/bootcount.h
> > > > > > +++ b/include/bootcount.h
> > > > > > @@ -11,6 +11,8 @@
> > > > > > #include <asm/io.h>
> > > > > > #include <asm/byteorder.h>
> > > > >
> > > > > > +#if defined(CONFIG_SPL_BOOTCOUNT_LIMIT) ||
> > > > > defined(CONFIG_BOOTCOUNT_LIMIT)
> > > > > > +
> > > > > > #if !defined(CONFIG_SYS_BOOTCOUNT_LE) &&
> > > > > !defined(CONFIG_SYS_BOOTCOUNT_BE)
> > > > > > # if __BYTE_ORDER == __LITTLE_ENDIAN
> > > > > > # define CONFIG_SYS_BOOTCOUNT_LE
> > > > > > @@ -40,4 +42,49 @@ static inline u32
> > > > > > raw_bootcount_load(volatile u32
> > > > > *addr)
> > > > > > return in_be32(addr);
> > > > > > }
> > > > > > #endif
> > > > > > +
> > > > > > +DECLARE_GLOBAL_DATA_PTR;
> > > > > > +static inline int bootcount_error(void)
> > > > > > +{
> > > > > > + unsigned long bootcount = bootcount_load();
> > > > > > + unsigned long bootlimit = env_get_ulong("bootlimit",
> > > > > > 10, 0); +
> > > > > > + if (bootlimit && bootcount > bootlimit) {
> > > > > > + printf("Warning: Bootlimit (%lu) exceeded.",
> > > > > > bootlimit);
> > > > > > + if (!(gd->flags & GD_FLG_SPL_INIT))
> > > > > > + printf(" Using altbootcmd.");
> > > > > > + printf("\n");
> > > > > > +
> > > > > > + return 1;
> > > > > > + }
> > > > > > +
> > > > > > + return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static inline void bootcount_inc(void)
> > > > > > +{
> > > > > > + unsigned long bootcount = bootcount_load();
> > > > > > +
> > > > > > + if (gd->flags & GD_FLG_SPL_INIT) {
> > > > > > + bootcount_store(++bootcount);
> > > > > > + return;
> > > > > > + }
> > > > > > +
> > > > > > +#ifndef CONFIG_SPL_BUILD
> > > > > > + /* Only increment bootcount when no bootcount
> > > > > > support in SPL */ +#ifndef CONFIG_SPL_BOOTCOUNT_LIMIT
> > > > > > + bootcount_store(++bootcount);
> > > > > > +#endif
> > > > > > + env_set_ulong("bootcount", bootcount);
> > > > > > +#endif /* !CONFIG_SPL_BUILD */
> > > > > > +}
> > > > > > +
> > > > >
> > > > > I'm kinda confused by this code... isn't this equivalent.?
> > > > >
> > > > > static inline void bootcount_inc(void)
> > > > > {
> > > > > unsigned long bootcount = bootcount_load();
> > > > >
> > > > > bootcount_store(++bootcount);
> > > > > #ifndef CONFIG_SPL_BUILD
> > > > > env_set_ulong("bootcount", bootcount);
> > > > > #endif /* !CONFIG_SPL_BUILD */
> > > > > }
> > > > >
> > > > > Also I suspect bootcount_store() will fail at link time on
> > > > > boards where the bootcount is stored in ext4?
> > >
> > > > I've run this patch set several times with travis-CI. No errors
> > > > were present (the travis-ci link is in the cover letter).
> > >
> > > > Maybe there are some out of tree boards, which use the
> > > > bootcount in some "odd" way....
> > >
> > >
> > > I'm only really aware of the ext4 stuff from when I picked
> > > through it to consolidate the bootcount into Kconfig. I don't
> > > think there would be any Travis failures for this case as you
> > > need to have bootcount in SPL which you can't have before this
> > > series.
>
> > Could you be more specific here?
>
> > This series adds support for bootcount in SPL. The travis-CI tests
> > which I've performed were correct for the all boards which use it:
>
> > https://travis-ci.org/lmajewski/u-boot-dfu/builds/373639971
>
> > The bootcount_inc() is added in generic SPL code - this seems to
> > work on all boards - boards which don't define CONFIG_SPL_BOOTCOUNT
> > will just return from it.
>
> > However, I don't know how the code will behave if one would like to
> > add ext4 support to it (including ext4 support to SPL).
>
> > I suppose that those boards will not enable SPL BOOTCOUNT in SPL and
> > use the code as it is now - just in u-boot.
>
> > This patch series was designed with one main use case in mind - the
> > "falcon" boot of Linux from SPL with bootcount support.
>
> > > If I try building a
> > > board like this (choose ext4 for the bootcount) and it fails to
> > > link:
> > >
> > > drivers/built-in.o: In function `bootcount_store':
> > > u-boot/drivers/bootcount/bootcount_ext.c:18: undefined reference
> > > to `fs_set_blk_dev'
> > > u-boot/drivers/bootcount/bootcount_ext.c:29: undefined reference
> > > to `fs_write'
> > > drivers/built-in.o: In function `bootcount_load':
> > > u-boot/drivers/bootcount/bootcount_ext.c:41: undefined reference
> > > to `fs_set_blk_dev'
> > > u-boot/drivers/bootcount/bootcount_ext.c:47: undefined reference
> > > to `fs_read'
> > >
> > > But having just played around with Kconfig a bit for this case,
> > > I'm not sure there's anything that's actually any better than a
> > > link time error; anything we did in Kconfig would just end up
> > > modelling out that link error.
> > >
>
> > Could you share which particular board this breaks? I've tested it
> > on Beagle Bone Black (and display5).
>
>
> There isn't one (at least not one I'm aware of), but this gives
> another impossible combination which you can select, of which we've
> lots already.
>
> I should've played around some more before commenting as I think what
> you've got is everything that's needed.It is all the matter of use-case. For SPL I've assumed that we will use IRAM or some RTC special register (as it is with display5) to store the bootcount (all info - magic number with boot count in 32 bits). This seems logical and optimal - since we "assume" that SPL shall be possible small. To avoid coincidence one needs to define CONFIG_SPL_BOOTCOUNT. Without it we shall have the same behaviour as previously on all supported boards (in theory at least :-) ). > > -- > Alex Kiernan Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
pgpuZdGrW_Tc3.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
