On some designs, the reset line could not be connected to the SoC reset line, in this case, request the GPIO and ensure the chip gets reset.
Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com> --- drivers/tpm/tpm2_tis_spi.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/tpm/tpm2_tis_spi.c b/drivers/tpm/tpm2_tis_spi.c index cfef5b8c24..824ab70bae 100644 --- a/drivers/tpm/tpm2_tis_spi.c +++ b/drivers/tpm/tpm2_tis_spi.c @@ -24,6 +24,9 @@ #include <linux/compiler.h> #include <linux/types.h> #include <linux/unaligned/be_byteshift.h> +#ifdef CONFIG_DM_GPIO +#include <asm-generic/gpio.h> +#endif #include "tpm_tis.h" #include "tpm_internal.h" @@ -598,6 +601,21 @@ static int tpm_tis_spi_probe(struct udevice *dev) { struct tpm_chip *chip = dev_get_priv(dev); int ret; +#ifdef CONFIG_DM_GPIO + struct gpio_desc reset_gpio; + + ret = gpio_request_by_name(dev, "gpio-reset", 0, + &reset_gpio, GPIOD_IS_OUT); + if (ret) + log(LOGC_NONE, LOGL_NOTICE, "%s: missing reset GPIO\n", + __func__); + + if (dm_gpio_is_valid(&reset_gpio)) { + dm_gpio_set_value(&reset_gpio, 0); + mdelay(1); + dm_gpio_set_value(&reset_gpio, 1); + } +#endif /* Ensure a minimum amount of time elapsed since reset */ mdelay(30); -- 2.14.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot