Thanks Scott for reviewing this patch > -----Original Message----- > From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Scott > Wood > Sent: Friday, April 20, 2018 6:40 AM > To: Calvin Johnson <linux...@gmail.com> > Cc: U-Boot Mailing List <u-boot@lists.denx.de> > Subject: Re: [U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to > switch QSPI bank > > On Thu, 2018-04-19 at 14:09 +0530, Calvin Johnson wrote: > > On Thu, Apr 19, 2018 at 12:17 PM, Scott Wood <o...@buserror.net> wrote: > > > On Mon, 2018-04-16 at 08:40 +0530, Calvin Johnson wrote: > > > > On Fri, Apr 13, 2018 at 12:18 AM, Jagdish Gediya > > > > <jagdish.ged...@nxp.com > > > > > > > > > wrote: > > > > > Add command "boot_bank X" to switch the boot bank to either > > > > > 1 or 2. > > > > > > > > Are these functions required as this can be handled by new env > > > > vars to switch banks? > > > > > > If you're going to add something new, a command is much more > > > pleasant than env vars -- particularly if you stick to something > > > like the familiar interfaces ("pix altbank", "qix altbank", etc), > > > and include reporting of which bank was booted from if it's not > > > there already. Of course, a fully standardized interface would be > > > even better. > > > > Yes, a fully standardized generic interface supporting all similar > > platforms with multiple banks > > And other boot sources such as NAND and MMC.
LS1012A has only one boot source i.e. QSPI > > > would be better. What this patch currently does can be done with > > simple env vars, like : > > > > setenv boot_bank_1 'i2c mw 0x24 0x7 0xfc; i2c mw 0x24 0x3 0xf5' > > setenv boot_bank_2 'i2c mw 0x24 0x7 0xfc; i2c mw 0x24 0x3 0xf4' > > ...if the user knows to env reset those variables after the update (versus > something that shows up in help), and if they don't get corrupted in a multi- > user board farm environment, etc. > With env there is always a probability of getting erased. In that case user will not have these commands. Better approach should be command which is always available. If required we can update the doc. --pk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot