On 04/19/2018 11:50 AM, Ley Foon Tan wrote:
> Add misc support such as EMAC and cpu info printout for Stratix SoC
>
> Signed-off-by: Chin Liang See <chin.liang....@intel.com>
> Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
> ---
> arch/arm/mach-socfpga/Makefile | 1 +
> arch/arm/mach-socfpga/misc_s10.c | 103
> ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 104 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-socfpga/misc_s10.c
>
> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
> index 910eb6f..b253914 100644
> --- a/arch/arm/mach-socfpga/Makefile
> +++ b/arch/arm/mach-socfpga/Makefile
> @@ -32,6 +32,7 @@ endif
>
> ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
> obj-y += clock_manager_s10.o
> +obj-y += misc_s10.o
> obj-y += reset_manager_s10.o
> obj-y += system_manager_s10.o
> obj-y += wrap_pinmux_config_s10.o
> diff --git a/arch/arm/mach-socfpga/misc_s10.c
> b/arch/arm/mach-socfpga/misc_s10.c
> new file mode 100644
> index 0000000..b1cc6ca
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/misc_s10.c
> @@ -0,0 +1,103 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
> + *
> + */
> +
> +#include <altera.h>
> +#include <common.h>
> +#include <errno.h>
> +#include <fdtdec.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <watchdog.h>
> +#include <asm/io.h>
> +#include <asm/arch/reset_manager.h>
> +#include <asm/arch/system_manager.h>
> +#include <asm/arch/misc.h>
> +#include <asm/pl310.h>
> +#include <linux/libfdt.h>
> +
> +#include <dt-bindings/reset/altr,rst-mgr-s10.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static struct socfpga_system_manager *sysmgr_regs =
> + (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
> +
> +/*
> + * DesignWare Ethernet initialization
> + */
> +#ifdef CONFIG_ETH_DESIGNWARE
Use the reset framework ? Talk to Dinh if in doubt
> +void dwmac_deassert_reset(const unsigned int of_reset_id,
> + const u32 phymode)
> +{
> + /* Put the emac we're using into reset.
> + * This is required before configuring the PHY interface
> + */
> + socfpga_emac_manage_reset(of_reset_id, 1);
> +
> + clrsetbits_le32(&sysmgr_regs->emac0 + (of_reset_id - EMAC0_RESET),
> + SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
> + phymode);
> +
> + socfpga_emac_manage_reset(of_reset_id, 0);
> +}
> +#endif
> +
> +/*
> + * Print CPU information
> + */
> +#if defined(CONFIG_DISPLAY_CPUINFO)
> +int print_cpuinfo(void)
> +{
> + puts("CPU: Intel FPGA SoCFPGA Platform\n");
> + puts("FPGA: Intel FPGA Stratix 10\n");
This can well come from DT.
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_ARCH_MISC_INIT
> +int arch_misc_init(void)
> +{
> + char qspi_string[13];
> +
> + sprintf(qspi_string, "<0x%08x>", cm_get_qspi_controller_clk_hz());
> + env_set("qspi_clock", qspi_string);
> +
> + return socfpga_eth_reset();
> +}
> +#endif
> +
> +int arch_early_init_r(void)
> +{
> + return 0;
Needed ?
> +}
> +
> +int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + if (argc != 2)
> + return CMD_RET_USAGE;
> +
> + argv++;
> +
> + switch (*argv[0]) {
> + case 'e': /* Enable */
> + socfpga_bridges_reset(1);
> + break;
> + case 'd': /* Disable */
> + socfpga_bridges_reset(0);
> + break;
Do you really need to duplicate this command ?
> + default:
> + return CMD_RET_USAGE;
> + }
> +
> + return 0;
> +}
> +
> +U_BOOT_CMD(bridge, 2, 1, do_bridge,
> + "SoCFPGA HPS FPGA bridge control",
> + "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
> + "bridge disable - Disable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA
> bridges\n"
> + ""
> +);
>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
