Hi Mehmet, On Wed, Apr 18, 2018 at 3:56 AM, Mehmet Ali İPİN <mehmet.i...@pavotek.com.tr> wrote: > Dear Fabio, > > I manually set spl_boot_list[] array with SPI, eMMCx, USB RAM etc. > For SPI NOR flash loader = spl_ll_find_loader(spl_boot_list[i]) > function (in spl.c) is returning a negative loader->boot_device number > -442503140 > > May be there is a definition in u-boot/SPL config files to make file to > generate SPI NOR flash boot code, instead of MMC, > Which enable this SPL function to return positive correct value for SPI NOR > Flash? > > eMMC is working, but I did not put SPL and u-boot in eMMC; > May be you can give me a link explaining how to SPL+u-boot.img to eMMC flash > commands.
You can check board/warp7/README > I added puts() messages to trace the execution; > > These are the messages at terminal. > > > U-Boot SPL 2018.05-rc1 (Apr 17 2018 - 22:43:50 -0700) > SPL set_bd() > SPL DRAM initialized > SPL Malloc; gd flags > board boot order spl boot list > spl_boot_list:8 > spl_boot_list:8 > Trying to boot from -442503140 You need to debug why you are getting this. Make sure your board is correctly configured to boot from SPI NOR via GPIO/fuses. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
