Add a command to debug the AXI bus.
Signed-off-by: Mario Six <mario....@gdsys.cc>
---
cmd/Kconfig | 8 ++
cmd/Makefile | 2 +
cmd/axi.c | 310 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 320 insertions(+)
create mode 100644 cmd/axi.c
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 136836d146..ce9ef66e3e 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -976,6 +976,14 @@ config CMD_USB_MASS_STORAGE
help
USB mass storage support
+config CMD_AXI
+ bool "axi"
+ depends on AXI
+ help
+ Enable the command "axi" for accessing AXI (Advanced eXtensible
+ Interface) busses, a on-chip interconnect specification for managing
+ functional blocks in SoC designs, which is also often used in designs
+ involving FPGAs (e.g. communication with IP cores in Xilinx FPGAs).
endmenu
diff --git a/cmd/Makefile b/cmd/Makefile
index 9a358e4801..ec1f0ad4dc 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -144,6 +144,8 @@ obj-$(CONFIG_CMD_DFU) += dfu.o
obj-$(CONFIG_CMD_GPT) += gpt.o
obj-$(CONFIG_CMD_ETHSW) += ethsw.o
+obj-$(CONFIG_CMD_AXI) += axi.o
+
# Power
obj-$(CONFIG_CMD_PMIC) += pmic.o
obj-$(CONFIG_CMD_REGULATOR) += regulator.o
diff --git a/cmd/axi.c b/cmd/axi.c
new file mode 100644
index 0000000000..d8001875e2
--- /dev/null
+++ b/cmd/axi.c
@@ -0,0 +1,310 @@
+/*
+ * (C) Copyright 2016
+ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eib...@gdsys.cc
+ *
+ * (C) Copyright 2017
+ * Mario Six, Guntermann & Drunck GmbH, mario....@gdsys.cc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <command.h>
+#include <console.h>
+#include <axi.h>
+
+static struct udevice *axi_cur_bus;
+static uint dp_last_size;
+static uint dp_last_addr;
+static uint dp_last_length = 0x40;
+
+static void show_bus(struct udevice *bus)
+{
+ struct udevice *dev;
+
+ printf("Bus %d:\t%s", bus->req_seq, bus->name);
+ if (device_active(bus))
+ printf(" (active %d)", bus->seq);
+ printf("\n");
+ for (device_find_first_child(bus, &dev);
+ dev;
+ device_find_next_child(&dev))
+ printf(" %s\n", dev->name);
+}
+
+static int do_axi_show_bus(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc == 1) {
+ /* show all busses */
+ struct udevice *bus;
+
+ for (uclass_first_device(UCLASS_AXI, &bus);
+ bus;
+ uclass_next_device(&bus))
+ show_bus(bus);
+ } else {
+ int i;
+
+ /* show specific bus */
+ i = simple_strtoul(argv[1], NULL, 10);
+
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_AXI, i, &bus);
+ if (ret) {
+ printf("Invalid bus %d: err=%d\n", i, ret);
+ return CMD_RET_FAILURE;
+ }
+ show_bus(bus);
+ }
+
+ return 0;
+}
+
+static int cmd_axi_set_bus_num(unsigned int busnum)
+{
+ struct udevice *bus;
+ struct udevice *dummy;
+ int ret;
+
+ /* Make sure that all sequence numbers are initialized */
+ for (uclass_first_device(UCLASS_AXI, &dummy);
+ dummy;
+ uclass_next_device(&dummy))
+ ;
+
+ ret = uclass_get_device_by_seq(UCLASS_AXI, busnum, &bus);
+ if (ret) {
+ debug("%s: No bus %d\n", __func__, busnum);
+ return ret;
+ }
+ axi_cur_bus = bus;
+
+ return 0;
+}
+
+static int axi_get_cur_bus(struct udevice **busp)
+{
+ if (!axi_cur_bus) {
+ puts("No AXI bus selected\n");
+ return ENODEV;
+ }
+ *busp = axi_cur_bus;
+
+ return 0;
+}
+
+static int do_axi_bus_num(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int ret = 0;
+ int bus_no;
+
+ if (argc == 1) {
+ /* querying current setting */
+ struct udevice *bus;
+
+ if (!axi_get_cur_bus(&bus))
+ bus_no = bus->seq;
+ else
+ bus_no = -1;
+ printf("Current bus is %d\n", bus_no);
+ } else {
+ bus_no = simple_strtoul(argv[1], NULL, 10);
+ printf("Setting bus to %d\n", bus_no);
+
+ ret = cmd_axi_set_bus_num(bus_no);
+
+ if (ret)
+ printf("Failure changing bus number (%d)\n", ret);
+ }
+
+ return ret ? CMD_RET_FAILURE : 0;
+}
+
+#define DISP_LINE_LEN 16
+
+int do_axi_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ unsigned int k;
+ ulong addr, length, size;
+ int rc = 0;
+ u32 linebuf[DISP_LINE_LEN / sizeof(u32)];
+ ulong nbytes;
+ enum axi_size_t axisize;
+ int unitsize;
+
+ /*
+ * We use the last specified parameters, unless new ones are
+ * entered.
+ */
+ size = dp_last_size;
+ addr = dp_last_addr;
+ length = dp_last_length;
+
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ if (!axi_cur_bus) {
+ puts("No AXI bus selected\n");
+ return CMD_RET_FAILURE;
+ }
+
+ if ((flag & CMD_FLAG_REPEAT) == 0) {
+ size = simple_strtoul(argv[1], NULL, 10);
+
+ /*
+ * Address is specified since argc > 4
+ */
+ addr = simple_strtoul(argv[2], NULL, 16);
+
+ /*
+ * If another parameter, it is the length to display.
+ * Length is the number of objects, not number of bytes.
+ */
+ if (argc > 3)
+ length = simple_strtoul(argv[3], NULL, 16);
+ }
+
+ switch (size) {
+ case 8:
+ axisize = AXI_SIZE_8;
+ unitsize = 1;
+ break;
+ case 16:
+ axisize = AXI_SIZE_16;
+ unitsize = 2;
+ break;
+ case 32:
+ axisize = AXI_SIZE_32;
+ unitsize = 4;
+ break;
+ default:
+ return CMD_RET_USAGE;
+ };
+
+ nbytes = length * unitsize;
+ do {
+ ulong linebytes = (nbytes > DISP_LINE_LEN) ?
+ DISP_LINE_LEN : nbytes;
+
+ for (k = 0; k < linebytes / unitsize; ++k) {
+ int res = axi_read(axi_cur_bus, addr + k * unitsize,
+ &linebuf[k], axisize);
+ if (res) {
+ if (res == -ENOSYS)
+ printf("axi_read failed; read size not
supported?\n");
+ else
+ printf("axi_read failed: %d\n", res);
+
+ return CMD_RET_FAILURE;
+ }
+ }
+ print_buffer(addr, (void *)linebuf, unitsize,
+ linebytes / unitsize,
+ DISP_LINE_LEN / unitsize);
+
+ nbytes -= linebytes;
+ addr += linebytes;
+ if (ctrlc()) {
+ rc = 1;
+ break;
+ }
+ } while (nbytes > 0);
+
+ dp_last_size = size;
+ dp_last_addr = addr;
+ dp_last_length = length;
+
+ return rc;
+}
+
+static int do_axi_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ u32 writeval;
+ ulong addr, count, size;
+ enum axi_size_t axisize;
+
+ if ((argc < 4) || (argc > 5))
+ return CMD_RET_USAGE;
+
+ size = simple_strtoul(argv[1], NULL, 16);
+
+ switch (size) {
+ case 8:
+ axisize = AXI_SIZE_8;
+ break;
+ case 16:
+ axisize = AXI_SIZE_16;
+ break;
+ case 32:
+ axisize = AXI_SIZE_32;
+ break;
+ default:
+ return CMD_RET_USAGE;
+ };
+
+ /* Address is specified since argc > 4 */
+ addr = simple_strtoul(argv[2], NULL, 16);
+
+ /* Get the value to write. */
+ writeval = simple_strtoul(argv[3], NULL, 16);
+
+ /* Count ? */
+ if (argc == 5)
+ count = simple_strtoul(argv[4], NULL, 16);
+ else
+ count = 1;
+
+ while (count-- > 0) {
+ int res = axi_write(axi_cur_bus, addr + count * sizeof(u32),
+ &writeval, axisize);
+
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
+static cmd_tbl_t cmd_axi_sub[] = {
+ U_BOOT_CMD_MKENT(bus, 1, 1, do_axi_show_bus, "", ""),
+ U_BOOT_CMD_MKENT(dev, 1, 1, do_axi_bus_num, "", ""),
+ U_BOOT_CMD_MKENT(md, 4, 1, do_axi_md, "", ""),
+ U_BOOT_CMD_MKENT(mw, 5, 1, do_axi_mw, "", ""),
+};
+
+static int do_ihs_axi(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ cmd_tbl_t *c;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ /* Strip off leading 'axi' command argument */
+ argc--;
+ argv++;
+
+ c = find_cmd_tbl(argv[0], &cmd_axi_sub[0], ARRAY_SIZE(cmd_axi_sub));
+
+ if (c)
+ return c->cmd(cmdtp, flag, argc, argv);
+ else
+ return CMD_RET_USAGE;
+}
+
+static char axi_help_text[] =
+ "bus - show AXI bus info\n"
+ "axi dev [dev] - show or set current AXI bus\n"
+ "axi md size address [# of objects] - read from AXI device\n"
+ "axi mw size address value [count] - write to AXI device (fill)\n";
+
+U_BOOT_CMD(
+ axi, 7, 1, do_ihs_axi,
+ "AXI sub-system",
+ axi_help_text
+);
--
2.16.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
