The unit test checks if a device tree is installed. It requires that the
'compatible' property of the root node exists. If available it prints the
'serial-number' property.

The serial-number property is derived from the environment variable
'serial#'. This can be used to check if the image_setup_libfdt() function
is executed.

A Python test is supplied. It sets a value for serial# and checks that the
selftest shows this as serial-number.

Signed-off-by: Heinrich Schuchardt <xypron.g...@gmx.de>
---
v3
        no change
v2
        new patch
---
 lib/efi_selftest/Makefile           |   1 +
 lib/efi_selftest/efi_selftest_fdt.c | 188 ++++++++++++++++++++++++++++++++++++
 test/py/tests/test_efi_selftest.py  |  14 +++
 3 files changed, 203 insertions(+)
 create mode 100644 lib/efi_selftest/efi_selftest_fdt.c

diff --git a/lib/efi_selftest/Makefile b/lib/efi_selftest/Makefile
index c4bdbdf6c0..88c44840d5 100644
--- a/lib/efi_selftest/Makefile
+++ b/lib/efi_selftest/Makefile
@@ -19,6 +19,7 @@ efi_selftest_console.o \
 efi_selftest_devicepath.o \
 efi_selftest_events.o \
 efi_selftest_exitbootservices.o \
+efi_selftest_fdt.o \
 efi_selftest_gop.o \
 efi_selftest_manageprotocols.o \
 efi_selftest_snp.o \
diff --git a/lib/efi_selftest/efi_selftest_fdt.c 
b/lib/efi_selftest/efi_selftest_fdt.c
new file mode 100644
index 0000000000..24db0dcf7d
--- /dev/null
+++ b/lib/efi_selftest/efi_selftest_fdt.c
@@ -0,0 +1,188 @@
+/*
+ * efi_selftest_pos
+ *
+ * Copyright (c) 2018 Heinrich Schuchardt <xypron.g...@gmx.de>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ *
+ * Test the EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.
+ *
+ * The following services are tested:
+ * OutputString, TestString, SetAttribute.
+ */
+
+#include <efi_selftest.h>
+#include <libfdt.h>
+
+static struct efi_boot_services *boottime;
+static const char *fdt;
+
+/* This should be sufficent for */
+#define BUFFERSIZE 0x100000
+
+static efi_guid_t fdt_guid = EFI_FDT_GUID;
+
+/*
+ * Convert FDT value to host endianness.
+ *
+ * @val                FDT value
+ * @return     converted value
+ */
+static uint32_t f2h(fdt32_t val)
+{
+       char *buf = (char *)&val;
+       char i;
+
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+       /* Swap the bytes */
+       i = buf[0]; buf[0] = buf[3]; buf[3] = i;
+       i = buf[1]; buf[1] = buf[2]; buf[2] = i;
+#endif
+       return *(uint32_t *)buf;
+}
+
+/*
+ * Return the value of a property of the FDT root node.
+ *
+ * @name       name of the property
+ * @return     value of the property
+ */
+static char *get_property(const u16 *property)
+{
+       struct fdt_header *header = (struct fdt_header *)fdt;
+       const fdt32_t *pos;
+       const char *strings;
+
+       if (!header)
+               return NULL;
+
+       if (f2h(header->magic) != FDT_MAGIC) {
+               printf("Wrong magic\n");
+               return NULL;
+       }
+
+       pos = (fdt32_t *)(fdt + f2h(header->off_dt_struct));
+       strings = fdt + f2h(header->off_dt_strings);
+
+       for (;;) {
+               switch (f2h(pos[0])) {
+               case FDT_BEGIN_NODE: {
+                       char *c = (char *)&pos[1];
+                       size_t i;
+
+                       for (i = 0; c[i]; ++i)
+                               ;
+                       pos = &pos[2 + (i >> 2)];
+                       break;
+               }
+               case FDT_PROP: {
+                       struct fdt_property *prop = (struct fdt_property *)pos;
+                       const char *label = &strings[f2h(prop->nameoff)];
+                       efi_status_t ret;
+
+                       /* Check if this is the property to be returned */
+                       if (!efi_st_strcmp_16_8(property, label)) {
+                               char *str;
+                               efi_uintn_t len = f2h(prop->len);
+
+                               if (!len)
+                                       return NULL;
+                               /*
+                                * The string might not be 0 terminated.
+                                * It is safer to make a copy.
+                                */
+                               ret = boottime->allocate_pool(
+                                       EFI_LOADER_DATA, len + 1,
+                                       (void **)&str);
+                               if (ret != EFI_SUCCESS) {
+                                       efi_st_printf("AllocatePool failed\n");
+                                       return NULL;
+                               }
+                               boottime->copy_mem(str, &pos[3], len);
+                               str[len] = 0;
+
+                               return str;
+                       }
+
+                       pos = &pos[3 + ((f2h(prop->len) + 3) >> 2)];
+                       break;
+               }
+               case FDT_NOP:
+                       pos = &pos[1];
+                       break;
+               default:
+                       return NULL;
+               }
+       }
+}
+
+/*
+ * Setup unit test.
+ *
+ * @handle:    handle of the loaded image
+ * @systable:  system table
+ * @return:    EFI_ST_SUCCESS for success
+ */
+static int setup(const efi_handle_t img_handle,
+                const struct efi_system_table *systable)
+{
+       efi_uintn_t i;
+
+       boottime = systable->boottime;
+
+       /* Find configuration tables */
+       for (i = 0; i < systable->nr_tables; ++i) {
+               if (!efi_st_memcmp(&systable->tables[i].guid, &fdt_guid,
+                                  sizeof(efi_guid_t)))
+                       fdt = systable->tables[i].table;
+       }
+       if (!fdt) {
+               efi_st_error("Missing device tree\n");
+               return EFI_ST_FAILURE;
+       }
+
+       return EFI_ST_SUCCESS;
+}
+
+/*
+ * Execute unit test.
+ *
+ * @return:    EFI_ST_SUCCESS for success
+ */
+static int execute(void)
+{
+       char *str;
+       efi_status_t ret;
+
+       str = get_property(L"compatible");
+       if (str) {
+               efi_st_printf("compatible: %s\n", str);
+               ret = boottime->free_pool(str);
+               if (ret != EFI_SUCCESS) {
+                       efi_st_error("FreePool failed\n");
+                       return EFI_ST_FAILURE;
+               }
+       } else {
+               efi_st_printf("Missing property 'compatible'\n");
+               return EFI_ST_FAILURE;
+       }
+       str = get_property(L"serial-number");
+       if (str) {
+               efi_st_printf("serial-number: %s\n", str);
+               ret = boottime->free_pool(str);
+               if (ret != EFI_SUCCESS) {
+                       efi_st_error("FreePool failed\n");
+                       return EFI_ST_FAILURE;
+               }
+       }
+
+       return EFI_ST_SUCCESS;
+}
+
+EFI_UNIT_TEST(fdt) = {
+       .name = "device tree",
+       .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
+       .setup = setup,
+       .execute = execute,
+       .on_request = true,
+};
diff --git a/test/py/tests/test_efi_selftest.py 
b/test/py/tests/test_efi_selftest.py
index 66b799bed6..b1ef6bd581 100644
--- a/test/py/tests/test_efi_selftest.py
+++ b/test/py/tests/test_efi_selftest.py
@@ -24,6 +24,20 @@ def test_efi_selftest(u_boot_console):
                raise Exception('Reset failed during the EFI selftest')
        u_boot_console.restart_uboot();
 
+@pytest.mark.buildconfigspec('cmd_bootefi_selftest')
+@pytest.mark.buildconfigspec('of_control')
+def test_efi_selftest_device_tree(u_boot_console):
+       u_boot_console.run_command(cmd='setenv efi_selftest list')
+       output = u_boot_console.run_command('bootefi selftest')
+       assert '\'device tree\'' in output
+       u_boot_console.run_command(cmd='setenv efi_selftest device tree')
+       u_boot_console.run_command(cmd='setenv -f serial# Testing DT')
+       u_boot_console.run_command(cmd='bootefi selftest ${fdtcontroladdr}', 
wait_for_prompt=False)
+       m = u_boot_console.p.expect(['serial-number: Testing DT', 'U-Boot'])
+       if m != 0:
+               raise Exception('Reset failed in \'device tree\' test')
+       u_boot_console.restart_uboot();
+
 @pytest.mark.buildconfigspec('cmd_bootefi_selftest')
 def test_efi_selftest_watchdog_reboot(u_boot_console):
        u_boot_console.run_command(cmd='setenv efi_selftest list')
-- 
2.14.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to