> On 23 Feb 2018, at 16:29, Jagan Teki <jagannadh.t...@gmail.com> wrote: > > > > On 23-Feb-2018 8:53 PM, "Dr. Philipp Tomsich" > <philipp.toms...@theobroma-systems.com > <mailto:philipp.toms...@theobroma-systems.com>> wrote: > >> On 23 Feb 2018, at 16:17, Jagan Teki <jagannadh.t...@gmail.com >> <mailto:jagannadh.t...@gmail.com>> wrote: >> >> Philipp, >> >> On Wed, Feb 14, 2018 at 9:26 PM, Jagan Teki <jagannadh.t...@gmail.com >> <mailto:jagannadh.t...@gmail.com>> wrote: >>> Series add new dts nodes like gmac, usb, io_domains and fixed existing >>> regulator, pmic stuff as per schematic. >>> >>> Changes for v2: >>> - Collect Acked-by and Reviewed-by tags from Philipp >>> - Add eMMC boot support >>> - Add missing commit message >>> - Remove RK_GPIO8 macro to sync with Linux >>> >>> Jagan Teki (9): >>> ARM: dts: rockchip: Sync rk3288-vyasa dts from Linux >>> ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1 >>> ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMIC >>> ARM: dts: rockchip: Add regulators for rk3288-vyasa >>> ARM: dts: rockchip: Add gmac support for rk3288-vyasa board >>> rockchip: rk3288-vyasa: defconfig: Enable gmac support >>> ARM: dts: rockchip: Add usb host for rk3288-vyasa >>> ARM: dts: rockchip: Add usb otg for rk3288-vyasa >>> rk3288: vyasa: Add eMMC boot support >> >> Can you pick this series, it's been there in ML from few releases. > > > These have been sent only after rc2 was tagged and are on my todo-list > for next (so they should go at the start of the merge window, when I send > out the pull-request to get our next merged back onto master). > > This this V2 initial version been from 11/17, ie reason for ping.
Just for future reference: I usually start processing a series once I have a final version. I’ve burned my fingers on merging vendor patches in the past after rc1 had been out. So my modus operandi now is: once v1 has its status in ‘changes requested’ I won’t track this until I get a newer version that can be merged. And if such a version comes in after rc2, I’ll try to err on the safe side… … OTOH, if you just barely miss a merge window and need it in rc2, you should ping me right away. Hope this helps, Phil. P.S.: I have you TPL fix on Travis right now... _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
