On 02/14/2018 04:30 PM, Jonathan Gray wrote: > On Wed, Feb 14, 2018 at 07:25:53PM +0000, York Sun wrote: >> Mingkai, >> >> LS1046ARDB is broken for both QSPI and SD. For QSPI, I cannot use >> environmental variables. For SD boot, it fails when trying to init SD >> card. Partial log is >> >> Initializing DDR....using SPD >> WARNING: Calling __hwconfig without a buffer and before environment is ready >> WARNING: Calling __hwconfig without a buffer and before environment is ready >> WARNING: Calling __hwconfig without a buffer and before environment is ready >> WARNING: Calling __hwconfig without a buffer and before environment is ready >> Trying to boot from MMC1 >> unable to select a mode >> mmc_init: -524, time 51 >> spl: mmc init failed with error: -524 >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### >> >> Please investigate. >> >> York > > This reminds me of the problem I ran into with qemu vexpress-a15.
Thanks for the quick note. I tried the patch in your second link (i.e. patch 871324), but it didn't fix my problem. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
