On Thu, Nov 05, 2009 at 08:53:36AM +0000, kevin.morf...@fearnside-systems.co.uk wrote: > This patch updates the s3c2410 nand driver from that of linux 2.6.31.5, > modified to make it work in the u-boot mtd nand architecture and to allow > setting the flash timing parameters from a board config file instead of > being hard coded. Note that this modified driver supports s3c2410 and > s3c2440. > > Signed-off-by: Kevin Morfitt <kevin.morf...@fearnside-systems.co.uk> > --- > > checkpatch.pl shows no errors or warnings, and MAKEALL ARM9 shows no new > errors or warnings. > > Tested on an Embest SBC2440-II Board with local s3c2440 patches as I don't > have an s3c2410 board. > > drivers/mtd/nand/s3c2410_nand.c | 134 +++++++++++++++++-------------- > include/asm-arm/arch-s3c24x0/s3c2410.h | 25 ++++++ > 2 files changed, 98 insertions(+), 61 deletions(-)
It looks like this got missed, probably because it either depended on something in (or destined for) the ARM tree, or I just assumed that because of the "PATCH ARM". Unfortunately, it doesn't apply cleanly anymore. Could you resend, if it's still needed? -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
