We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.
This round goes to pl01x.
Signed-off-by: Alexander Graf <ag...@suse.de>
---
arch/arm/Kconfig | 11 +++++++++++
drivers/serial/Kconfig | 6 ++++++
include/configs/hikey.h | 3 ---
include/configs/integrator-common.h | 2 --
include/configs/poplar.h | 3 ---
include/configs/qemu-arm.h | 3 ---
include/configs/rpi.h | 1 -
include/configs/stv0991.h | 3 ---
include/configs/thunderx_88xx.h | 1 -
include/configs/vexpress_aemv8a.h | 1 -
scripts/config_whitelist.txt | 1 -
11 files changed, 17 insertions(+), 18 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1557e7cfdf..b2345eaa26 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -493,6 +493,7 @@ config TARGET_STV0991
select DM_SPI
select DM_SPI_FLASH
select SPI_FLASH
+ select PL01X_SERIAL
config TARGET_X600
bool "Support x600"
@@ -548,6 +549,7 @@ config ARCH_BCM283X
select DM_SERIAL
select DM_GPIO
select OF_CONTROL
+ select PL01X_SERIAL
imply FAT_WRITE
config TARGET_VEXPRESS_CA15_TC2
@@ -630,6 +632,7 @@ config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select DM
select DM_SERIAL
+ select PL01X_SERIAL
config ARCH_KEYSTONE
bool "TI Keystone"
@@ -697,6 +700,7 @@ config ARCH_QEMU
select DM
select DM_SERIAL
select OF_CONTROL
+ select PL01X_SERIAL
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
@@ -835,15 +839,18 @@ config TEGRA
config TARGET_VEXPRESS64_AEMV8A
bool "Support vexpress_aemv8a"
select ARM64
+ select PL01X_SERIAL
config TARGET_VEXPRESS64_BASE_FVP
bool "Support Versatile Express ARMv8a FVP BASE model"
select ARM64
select SEMIHOSTING
+ select PL01X_SERIAL
config TARGET_VEXPRESS64_BASE_FVP_DRAM
bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
select ARM64
+ select PL01X_SERIAL
help
This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
the default config to allow the user to load the images directly into
@@ -853,6 +860,7 @@ config TARGET_VEXPRESS64_BASE_FVP_DRAM
config TARGET_VEXPRESS64_JUNO
bool "Support Versatile Express Juno Development Platform"
select ARM64
+ select PL01X_SERIAL
config TARGET_LS2080A_EMU
bool "Support ls2080a_emu"
@@ -945,6 +953,7 @@ config TARGET_HIKEY
select DM_GPIO
select DM_SERIAL
select OF_CONTROL
+ select PL01X_SERIAL
help
Support for HiKey 96boards platform. It features a HI6220
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
@@ -956,6 +965,7 @@ config TARGET_POPLAR
select OF_CONTROL
select DM_SERIAL
select DM_USB
+ select PL01X_SERIAL
help
Support for Poplar 96boards EE platform. It features a HI3798cv200
SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
@@ -1211,6 +1221,7 @@ config TARGET_THUNDERX_88XX
select ARM64
select OF_CONTROL
select SYS_CACHE_SHIFT_7
+ select PL01X_SERIAL
config ARCH_ASPEED
bool "Support Aspeed SoCs"
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 99aa817e63..4167683885 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,6 +459,12 @@ config PL011_SERIAL
help
Select this to enable a UART for platforms using PL011.
+config PL01X_SERIAL
+ bool "ARM PL010 and PL011 driver"
+ depends on DM_SERIAL
+ help
+ Select this to enable a UART for platforms using PL010 or PL011.
+
config ROCKCHIP_SERIAL
bool "Rockchip on-chip UART support"
depends on DM_SERIAL && SPL_OF_PLATDATA
diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index 7eaa6e4667..aaddf4c1f1 100644
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -50,9 +50,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
-/* Serial port PL010/PL011 through the device model */
-#define CONFIG_PL01X_SERIAL
-
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
/*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
diff --git a/include/configs/integrator-common.h
b/include/configs/integrator-common.h
index edc798b117..f66d954748 100644
--- a/include/configs/integrator-common.h
+++ b/include/configs/integrator-common.h
@@ -15,8 +15,6 @@
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* Size of
malloc() pool */
-/* Serial port PL010/PL011 through the device model */
-#define CONFIG_PL01X_SERIAL
#define CONFIG_CONS_INDEX 0
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/poplar.h b/include/configs/poplar.h
index 8a12b526a8..9641b27b1b 100644
--- a/include/configs/poplar.h
+++ b/include/configs/poplar.h
@@ -26,9 +26,6 @@
/* ATF bl33.bin load address (must match) */
#define CONFIG_SYS_TEXT_BASE 0x37000000
-/* PL010/PL011 */
-#define CONFIG_PL01X_SERIAL
-
/* USB configuration */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
index c8852cef34..c8ba78d8aa 100644
--- a/include/configs/qemu-arm.h
+++ b/include/configs/qemu-arm.h
@@ -20,9 +20,6 @@
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
#define CONFIG_SYS_MALLOC_LEN SZ_16M
-/* QEMU's PL011 serial port is detected via FDT using the device model */
-#define CONFIG_PL01X_SERIAL
-
/* QEMU implements a 62.5MHz architected timer */
/* FIXME: can we rely on CNTFREQ instead of hardcoding this fact here? */
#define CONFIG_SYS_ARCH_TIMER
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 2c84cf9a49..5ffe98015f 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -77,7 +77,6 @@
/* Console UART, can be configured dynamically in config.txt */
#define CONFIG_BCM283X_MU_SERIAL
-#define CONFIG_PL01X_SERIAL
/* Console configuration */
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index c99fb676cb..3e0b8a157f 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -25,9 +25,6 @@
(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
-/* serial port (PL011) configuration */
-#define CONFIG_PL01X_SERIAL
-
/* user interface */
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h
index 209a7c3417..34940efb41 100644
--- a/include/configs/thunderx_88xx.h
+++ b/include/configs/thunderx_88xx.h
@@ -35,7 +35,6 @@
/* PL011 Serial Configuration */
-#define CONFIG_PL01X_SERIAL
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_CONS_INDEX 1
diff --git a/include/configs/vexpress_aemv8a.h
b/include/configs/vexpress_aemv8a.h
index f18e2ee068..07cc92ce17 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -110,7 +110,6 @@
/* PL011 Serial Configuration */
#define CONFIG_CONS_INDEX 0
-#define CONFIG_PL01X_SERIAL
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_PL011_CLOCK 7273800
#else
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index a4159ebb36..6e4e322986 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1628,7 +1628,6 @@ CONFIG_PIXIS_BRDCFG1_TDM
CONFIG_PIXIS_SGMII_CMD
CONFIG_PL011_CLOCK
CONFIG_PL011_SERIAL_RLCR
-CONFIG_PL01X_SERIAL
CONFIG_PL01x_PORTS
CONFIG_PLATFORM_ENV_SETTINGS
CONFIG_PLATINUM_BOARD
--
2.12.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
