Use the common RCAR_GEN2 config option instead of enumerating
each SoC and having a lengthy ifdef clause. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com>
Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org>
Cc: Joe Hershberger <joe.hershber...@ni.com>
---
drivers/net/sh_eth.c | 7 ++-----
drivers/net/sh_eth.h | 6 ++----
2 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 6edb51e12f..d065141bf9 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -421,8 +421,7 @@ static int sh_eth_config(struct sh_eth_dev *eth)
#if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740)
sh_eth_write(port_info, CONFIG_SH_ETHER_SH7734_MII, RMII_MII);
-#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
- defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794)
+#elif defined(CONFIG_RCAR_GEN2)
sh_eth_write(port_info, sh_eth_read(port_info, RMIIMR) | 0x1, RMIIMR);
#endif
/* Configure phy */
@@ -447,9 +446,7 @@ static int sh_eth_config(struct sh_eth_dev *eth)
sh_eth_write(port_info, GECMR_100B, GECMR);
#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
sh_eth_write(port_info, 1, RTRATE);
-#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \
- defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \
- defined(CONFIG_R8A7794)
+#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_RCAR_GEN2)
val = ECMR_RTM;
#endif
} else if (phy->speed == 10) {
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index a0dcfcae09..ea4aa105bc 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -302,8 +302,7 @@ static const u16
sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
#elif defined(CONFIG_R8A7740)
#define SH_ETH_TYPE_GETHER
#define BASE_IO_ADDR 0xE9A00000
-#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
- defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794)
+#elif defined(CONFIG_RCAR_GEN2)
#define SH_ETH_TYPE_ETHER
#define BASE_IO_ADDR 0xEE700200
#elif defined(CONFIG_R7S72100)
@@ -514,8 +513,7 @@ enum FELIC_MODE_BIT {
ECMR_PRM = 0x00000001,
#ifdef CONFIG_CPU_SH7724
ECMR_RTM = 0x00000010,
-#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
- defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794)
+#elif defined(CONFIG_RCAR_GEN2)
ECMR_RTM = 0x00000004,
#endif
--
2.15.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
