On Wednesday 20 December 2017 08:39 PM, Sekhar Nori wrote:
> Configure AM57xx EVMs for the exact PHY part that is
> present on the various boards. This makes U-Boot apply
> configurations needed for this PHY like centering the
> FLP timing.
> 
> For configurations to take effect, DM_ETH needs to be
> enabled. Do that too.
> 
> Tested on BeagleBoard x15 and AM571x IDK.
> 
> Signed-off-by: Sekhar Nori <nsek...@ti.com>

Reviewed-by: Lokesh Vutla <lokeshvu...@ti.com>

Thanks and regards,
Lokesh

> ---
>  configs/am57xx_evm_defconfig    | 3 +++
>  configs/am57xx_hs_evm_defconfig | 3 +++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
> index fc96401d3e55..04484e0ae213 100644
> --- a/configs/am57xx_evm_defconfig
> +++ b/configs/am57xx_evm_defconfig
> @@ -52,6 +52,9 @@ CONFIG_SPI_FLASH=y
>  CONFIG_SPI_FLASH_BAR=y
>  CONFIG_SPI_FLASH_SPANSION=y
>  CONFIG_PHYLIB=y
> +CONFIG_PHY_MICREL=y
> +CONFIG_PHY_MICREL_KSZ90X1=y
> +CONFIG_DM_ETH=y
>  CONFIG_DM_PMIC=y
>  CONFIG_PMIC_PALMAS=y
>  CONFIG_DM_REGULATOR=y
> diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
> index 681e2a54c8ff..6c33cc9030e0 100644
> --- a/configs/am57xx_hs_evm_defconfig
> +++ b/configs/am57xx_hs_evm_defconfig
> @@ -55,6 +55,9 @@ CONFIG_SPI_FLASH=y
>  CONFIG_SPI_FLASH_BAR=y
>  CONFIG_SPI_FLASH_SPANSION=y
>  CONFIG_PHYLIB=y
> +CONFIG_PHY_MICREL=y
> +CONFIG_PHY_MICREL_KSZ90X1=y
> +CONFIG_DM_ETH=y
>  CONFIG_DM_PMIC=y
>  CONFIG_PMIC_PALMAS=y
>  CONFIG_DM_REGULATOR=y
> 
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to