Best Regards! Anson Huang
> -----Original Message----- > From: Fabio Estevam [mailto:feste...@gmail.com] > Sent: 2018-01-07 6:48 AM > To: Anson Huang <anson.hu...@nxp.com> > Cc: Stefano Babic <sba...@denx.de>; Fabio Estevam > <fabio.este...@nxp.com>; Albert ARIBAUD <albert.u.b...@aribaud.net>; > Christian Gmeiner <christian.gmei...@gmail.com>; Peng Fan > <peng....@nxp.com>; U-Boot-Denx <u-boot@lists.denx.de> > Subject: Re: [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support > > Hi Anson, > > On Fri, Jan 5, 2018 at 4:25 AM, Anson Huang <anson.hu...@nxp.com> wrote: > > > Thanks for the comments, the current reboot command works is just > > because wdog driver is enabled and when system reboot, the reboot > > notification callback in wdog driver will do reset. But if wdog is > > disabled in dtb, the reboot command will fail. > > > > As now we use PSCI, the reboot operation will eventually call into > > u-boot's psci reset callback, we should support this feature, the > > reboot feature in Linux kernel should NOT depends on wdog's existence. > > Ok, but what about erratum e10574 (Watchdog: A watchdog timeout or > software trigger will not reset the SOC)? > > According to this erratum WDOG_B pin needs to generate a system power on. Correct, we need to enable WDA to toggle WDOG_B for reset, thanks. Will send a V3 patch set. Anson. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
