On 01/06/2018 07:17 PM, Jason Rush wrote: > Adopt the Linux DT bindings. This also fixes an issue > with the indaddrtrig register on the Cadence QSPI > device being programmed with the wrong value for the > socfpga arch. > > Tested on TI K2G platform: > Tested-by: Vignesh R <vigne...@ti.com> > > Tested on a socfpga-cyclonev board: > Tested-by: Simon Goldschmidt <sgoldschm...@de.pepperl-fuchs.com> > > Signed-off-by: Jason Rush <jar...@gmail.com> > > Jason Rush (5): > spi: cadence_spi: Sync DT bindings with Linux > dts: cadence_spi: Sync DT bindings with Linux > config: cadence_spi: Remove defines read from DT > dts: k2g: Clean-up indentation > dts: cadence_spi: Update documentation for DT bindings > > arch/arm/dts/keystone-k2g-evm.dts | 75 > +++++++++++++-------------- > arch/arm/dts/keystone-k2g.dtsi | 5 +- > arch/arm/dts/socfpga.dtsi | 5 +- > arch/arm/dts/socfpga_arria10.dtsi | 4 +- > arch/arm/dts/socfpga_arria5_socdk.dts | 9 ++-- > arch/arm/dts/socfpga_cyclone5_is1.dts | 9 ++-- > arch/arm/dts/socfpga_cyclone5_socdk.dts | 9 ++-- > arch/arm/dts/socfpga_cyclone5_sockit.dts | 9 ++-- > arch/arm/dts/socfpga_cyclone5_socrates.dts | 9 ++-- > arch/arm/dts/socfpga_cyclone5_sr1500.dts | 9 ++-- > arch/arm/dts/socfpga_cyclone5_vining_fpga.dts | 18 +++---- > arch/arm/dts/stv0991.dts | 12 +++-- > doc/device-tree-bindings/spi/spi-cadence.txt | 13 +++-- > drivers/spi/cadence_qspi.c | 20 ++++--- > drivers/spi/cadence_qspi.h | 6 ++- > drivers/spi/cadence_qspi_apb.c | 15 ++---- > include/configs/k2g_evm.h | 1 - > include/configs/socfpga_common.h | 1 - > include/configs/stv0991.h | 1 - > 19 files changed, 113 insertions(+), 117 deletions(-) >
Whole series Acked-by: Marek Vasut <ma...@denx.de> So please apply after 2018.01 is out . Thanks -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
