Adopt the Linux DT bindings. This also fixes an issue with the indaddrtrig register on the Cadence QSPI device being programmed with the wrong value for the socfpga arch.
Tested on TI K2G platform: Tested-by: Vignesh R <vigne...@ti.com> Tested on a socfpga-cyclonev board: Tested-by: Simon Goldschmidt <sgoldschm...@de.pepperl-fuchs.com> Signed-off-by: Jason Rush <jar...@gmail.com> Jason Rush (5): spi: cadence_spi: Sync DT bindings with Linux dts: cadence_spi: Sync DT bindings with Linux config: cadence_spi: Remove defines read from DT dts: k2g: Clean-up indentation dts: cadence_spi: Update documentation for DT bindings arch/arm/dts/keystone-k2g-evm.dts | 75 +++++++++++++-------------- arch/arm/dts/keystone-k2g.dtsi | 5 +- arch/arm/dts/socfpga.dtsi | 5 +- arch/arm/dts/socfpga_arria10.dtsi | 4 +- arch/arm/dts/socfpga_arria5_socdk.dts | 9 ++-- arch/arm/dts/socfpga_cyclone5_is1.dts | 9 ++-- arch/arm/dts/socfpga_cyclone5_socdk.dts | 9 ++-- arch/arm/dts/socfpga_cyclone5_sockit.dts | 9 ++-- arch/arm/dts/socfpga_cyclone5_socrates.dts | 9 ++-- arch/arm/dts/socfpga_cyclone5_sr1500.dts | 9 ++-- arch/arm/dts/socfpga_cyclone5_vining_fpga.dts | 18 +++---- arch/arm/dts/stv0991.dts | 12 +++-- doc/device-tree-bindings/spi/spi-cadence.txt | 13 +++-- drivers/spi/cadence_qspi.c | 20 ++++--- drivers/spi/cadence_qspi.h | 6 ++- drivers/spi/cadence_qspi_apb.c | 15 ++---- include/configs/k2g_evm.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/stv0991.h | 1 - 19 files changed, 113 insertions(+), 117 deletions(-) -- 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
