[U-Boot] [PATCH v2 02/13] arm: emif-common: Add ecc specific emif registers

[Lokesh Vutla]

This is a slight difference in emif_ddr_phy_status register offsets for
DRA7xx EMIF and older versions. And ecc registers are available only
in DRA7xx EMIC. Add support for this difference and ecc registers.

Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
---
 arch/arm/include/asm/emif.h       | 17 ++++++++++++++++-
 arch/arm/mach-omap2/emif-common.c |  6 +++---
 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 9a46340deb..a661ba9032 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -664,12 +664,27 @@ struct emif_reg_struct {
        u32 emif_prio_class_serv_map;
        u32 emif_connect_id_serv_1_map;
        u32 emif_connect_id_serv_2_map;
-       u32 padding8[5];
+       u32 padding8;
+       u32 emif_ecc_ctrl_reg;
+       u32 emif_ecc_address_range_1;
+       u32 emif_ecc_address_range_2;
+       u32 padding8_1;
        u32 emif_rd_wr_exec_thresh;
        u32 emif_cos_config;
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_ARCH_KEYSTONE)
+       u32 padding9[2];
+       u32 emif_1b_ecc_err_cnt;
+       u32 emif_1b_ecc_err_thrush;
+       u32 emif_1b_ecc_err_dist_1;
+       u32 emif_1b_ecc_err_addr_log;
+       u32 emif_2b_ecc_err_addr_log;
+       u32 emif_ddr_phy_status[28];
+       u32 padding10[19];
+#else
        u32 padding9[6];
        u32 emif_ddr_phy_status[28];
        u32 padding10[20];
+#endif
        u32 emif_ddr_ext_phy_ctrl_1;
        u32 emif_ddr_ext_phy_ctrl_1_shdw;
        u32 emif_ddr_ext_phy_ctrl_2;
diff --git a/arch/arm/mach-omap2/emif-common.c 
b/arch/arm/mach-omap2/emif-common.c
index def7fe0f0a..2b03dbecf4 100644
--- a/arch/arm/mach-omap2/emif-common.c
+++ b/arch/arm/mach-omap2/emif-common.c
@@ -255,7 +255,7 @@ static void update_hwleveling_output(u32 base, const struct 
emif_regs *regs)
        u32 *emif_ext_phy_ctrl_reg, *emif_phy_status;
        u32 reg, i, phy;
 
-       emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[7];
+       emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[6];
        phy = readl(&emif->emif_ddr_phy_ctrl_1);
 
        /* Update PHY_REG_RDDQS_RATIO */
@@ -269,7 +269,7 @@ static void update_hwleveling_output(u32 base, const struct 
emif_regs *regs)
 
        /* Update PHY_REG_FIFO_WE_SLAVE_RATIO */
        emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_2;
-       emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[12];
+       emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[11];
        if (!(phy & EMIF_DDR_PHY_CTRL_1_RDLVLGATE_MASK_MASK))
                for (i = 0; i < PHY_FIFO_WE_SLAVE_RATIO_REGS; i++) {
                        reg = readl(emif_phy_status++);
@@ -279,7 +279,7 @@ static void update_hwleveling_output(u32 base, const struct 
emif_regs *regs)
 
        /* Update PHY_REG_WR_DQ/DQS_SLAVE_RATIO */
        emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_12;
-       emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[17];
+       emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[16];
        if (!(phy & EMIF_DDR_PHY_CTRL_1_WRLVL_MASK_MASK))
                for (i = 0; i < PHY_REG_WR_DQ_SLAVE_RATIO_REGS; i++) {
                        reg = readl(emif_phy_status++);
-- 
2.15.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot