[U-Boot] [PATCH v3 4/6] arm: am33xx: Avoid writing into reserved DPLL divider

[Lokesh Vutla]

DPLL DRR doesn't have an M4 divider. But the clock driver is trying
to configure M4 divider as 4(writing into a reserved register).
Fixing it by making M4 divider as -1.

Reported-by: Steve Kipisz <s-kipi...@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
---
 arch/arm/mach-omap2/am33xx/clock_am33xx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/am33xx/clock_am33xx.c 
b/arch/arm/mach-omap2/am33xx/clock_am33xx.c
index 1780bbdb6f..2352c37822 100644
--- a/arch/arm/mach-omap2/am33xx/clock_am33xx.c
+++ b/arch/arm/mach-omap2/am33xx/clock_am33xx.c
@@ -109,22 +109,22 @@ const struct dpll_params 
dpll_per_192MHz[NUM_CRYSTAL_FREQ] = {
 const struct dpll_params dpll_ddr3_303MHz[NUM_CRYSTAL_FREQ] = {
                {505, 15, 2, -1, -1, -1, -1}, /*19.2*/
                {101, 3, 2, -1, -1, -1, -1}, /* 24 MHz */
-               {303, 24, 1, -1, 4, -1, -1}, /* 25 MHz */
-               {303, 12, 2, -1, 4, -1, -1}  /* 26 MHz */
+               {303, 24, 1, -1, -1, -1, -1}, /* 25 MHz */
+               {303, 12, 2, -1, -1, -1, -1}  /* 26 MHz */
 };
 
 const struct dpll_params dpll_ddr3_400MHz[NUM_CRYSTAL_FREQ] = {
                {125, 5, 1, -1, -1, -1, -1}, /*19.2*/
                {50, 2, 1, -1, -1, -1, -1}, /* 24 MHz */
-               {16, 0, 1, -1, 4, -1, -1}, /* 25 MHz */
-               {200, 12, 1, -1, 4, -1, -1}  /* 26 MHz */
+               {16, 0, 1, -1, -1, -1, -1}, /* 25 MHz */
+               {200, 12, 1, -1, -1, -1, -1}  /* 26 MHz */
 };
 
 const struct dpll_params dpll_ddr2_266MHz[NUM_CRYSTAL_FREQ] = {
                {665, 47, 1, -1, -1, -1, -1}, /*19.2*/
                {133, 11, 1, -1, -1, -1, -1}, /* 24 MHz */
-               {266, 24, 1, -1, 4, -1, -1}, /* 25 MHz */
-               {133, 12, 1, -1, 4, -1, -1}  /* 26 MHz */
+               {266, 24, 1, -1, -1, -1, -1}, /* 25 MHz */
+               {133, 12, 1, -1, -1, -1, -1}  /* 26 MHz */
 };
 
 __weak const struct dpll_params *get_dpll_mpu_params(void)
-- 
2.15.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot