Add support for using the full fitImage parsing code in SPL. This is useful ie. if we want SPL to verify the U-Boot proper fitImage using RSA signature. While verifying image signature can be added to the simplified fitImage handling code in U-Boot SPL, verifying configuration signatures becomes quite hairy. Thus, loading the entire fitImage and then applying the full fitImage handling code on it is far less intrusive change. The size of the SPL with full fitImage code obviously grows, so this might not be suitable for size-constrained systems.
The remaining four patches allow applying a DTO from fitImage onto the SPL's internal DT and restart the image loading process. The usecase here is ie. to put a replacement public key into the DTO, patch the /signature node and load offset node of the U-Boot SPL's DT and restart the image loading process to load U-Boot proper signed with the replacement private key. The user is then able to replace the DTO and sign own U-Boot fitImage without replacing the SPL binary itself. Marek Vasut (9): fit: Fix CONFIG_FIT_SPL_PRINT fit: Add empty fit_print_contents() and fit_image_print() fit: Add standalone image type handling fit: Verify all configuration signatures spl: Add full fitImage support spl: Add support for overlaying U-Boot DT spl: Restart loading if load_image returns -EAGAIN spl: ram: Add support for fetching image position from control DT spl: spi: Add support for fetching image position from control DT Kconfig | 17 +++++++++++ README | 2 +- common/image-fit.c | 36 +++++++++++++--------- common/spl/spl.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++- common/spl/spl_ram.c | 21 ++++++++++--- common/spl/spl_spi.c | 13 ++++++++ include/image.h | 1 + 7 files changed, 154 insertions(+), 22 deletions(-) -- 2.15.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
