Add CONFIG_MTD_M25P80 kconfig entry
Reviewed-by: Simon Glass <s...@chromium.org>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
drivers/mtd/spi-nor/Kconfig | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 3ad2b16..64d5553 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -15,6 +15,23 @@ menuconfig MTD_SPI_NOR
if MTD_SPI_NOR
+config MTD_M25P80
+ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
+ depends on DM_SPI
+ help
+ This enables access to most modern SPI flash chips, used for
+ program and data storage. Series supported include Atmel AT26DF,
+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
+ are supported as well. See the driver source for the current list,
+ or to add other chips.
+
+ Note that the original DataFlash chips (AT45 series, not AT26DF),
+ need an entirely different driver.
+
+ Set up your spi devices with the right board-specific platform data,
+ if you want to specify device partitioning or to use a device which
+ doesn't support the JEDEC ID instruction.
+
config MTD_SPI_NOR_USE_4K_SECTORS
bool "Use small 4096 B erase sectors"
default y
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
